Delixi Electric

DZ47sLES Miniature Earth Residual Current Circuit Breaker

DZ47sLES compact earth leakage circuit breaker is a new series of products carefully developed with integrating innovative technology. This product features with a narrower width, more convenient wiring, more comprehensive protection and more stable performance! It can be suitable for AC 50/60Hz lines with a rated voltage 230V/400V and a rated current 63A and below, with electric leakage, overload, and short circuit protection functions.

了解详情

DZ47sY Surge Protective Device

DZ47sY series surge protective device is mainly used in AC 50Hz/60Hz single-phase/three-phase power distribution system with a rated voltage 230V/400V to suppress transient overvoltage, discharge surge energy, and prevent or reduce the damage caused by transient overvoltage due to lightning strikes or operation.

了解详情

CDPZ30v Lighting Distribution Box

了解详情

CDM3S Moulded Case Circuit Breaker

The Navigator series new CDM3S moulded case circuit breaker is a mechanical switch used in the low-voltage distribution line can power on, carry and power off the current under normal circuit conditions, can also power on and carry the current for a certain time and power off the current for protection of lines and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line. It is widely used in low-voltage power places such as electricity, construction, industry, and OEM.

了解详情

CDM3LS Residual Current Operated Circuit Breaker

The Navigator series new CDM3LS residual current operated circuit breaker has its main function to provide indirect contact protection for personal electric shock that causes fatal danger, and to provide protection for electrical fire caused by ground fault current, such as insulation damage. It can provide the protection of circuits and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line, and is widely used in low-voltage power places such as electric power, construction, industry, and OEM.

了解详情

DZ47SCB Special Protection Device For Surge Protective Device

DZ47SCB series surge protector special protection device is connected in SPD loop in series to realize the function of quickly cutting off power frequency small current and high current lightning strike without trip using internal current sorting channel device. Compared with conventional backup protection devices, it has advantages of higher breaking capacity and better surge shock tolerance, and of realizing quick-cut of low short-circuit current.

了解详情

CDEN1 Lighting Distribution Box

了解详情

CDEN1X Fiber Box

CDEN1X optical fiber-to-the-home information box is a system developed to adapt to the development of home informatization and development and to realize real home intelligence and information for unified management of the telephone, fax, TV, satellite reception, wireless optical network, and security equipment inside the home, with extremely convenient management and maintenance. It fully provides a practical solution to completely solve the problem of intelligent wiring, management, use and maintenance of the home. The purpose is to create a beautiful and comfortable "smart" information home for consumers.

了解详情

CDC19s Capacitor Changeover Contactor

Navigator series CDC19s capacitor changeover contactor is the first new capacitor changeover contactor since the launch of CDC9 . With its perfect industrial classic appearance, more complete product specifications, longer electrical life, and multiple humanized designs, the customer can enjoy a convenient and secure perfect use experience.

了解详情

CDM9i Moulded Case Circuit Breaker

The new CDM9i moulded case circuit breaker has excellent performance and quality and perfect industrial design with its new design concept of new specifications, new performance, and new application by re-integration of global resource advantages through the industry-leading innovative technology platform. With its own efficient and excellent industrial manufacturing efficiency, Delixi Electric provides OEM and industry customers with new products featuring with rich types, complete specifications and perfect protection.

了解详情

DZ20Lw Residual Current Operated Circuit Breaker

DZ20Lw residual current operated circuit breaker is primarily suitable for AC 50Hz power distribution network with rated voltage of 400V and a rated current up to 630A for electric leakage protection; It can also be used to prevent fire hazards caused by ground fault current due to equipment insulation damage, and it is also for distribution of electrical energy h and for protection of lines and power equipment against overload and short circuit, and for infrequent switching of lines.

了解详情

DZ20w Moulded Case Circuit Breaker

DZ20w moulded case circuit breaker is suitable for AC 50Hz circuits with a rated insulation voltage 400V, a rated working voltage 380V and below, and rated current 16A to 630A. This series of circuit breakers is used in power distribution networks for electric energy distribution and for overload and short-circuit protection of lines and electrical equipment. Under normal circumstances, the circuit breaker can also be used for infrequent line switching and infrequent motor starts. It is widely used in temporary electricity places such as construction sites. Comply with standards: GB/T 14048.2, IEC 60947-2.

了解详情

AFDD Arc Fault Protection Circuit Breaker

The most prominent function of AFDD is detecting arc faults at the load side of the line and disconnecting arc faults. It is recommended for occasions where people are dense and flammable materials are concentrated, such as: home decoration, schools, hotels, libraries, and museums.

了解详情

CDEN1 Lighting Distribution Box

了解详情

CJX2sF Large AC Contactor (CJX2sF-4P Added)

CJX2sF series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz or 60Hz circuits with a rated operating voltage up to 1000V, and a rated operating current up to 2100A for remote connection and disconnection of the circuit; it can form an electromagnetic starter together with an appropriate thermal overload relay to protect the circuit that may be overloaded.

了解详情

DZ15w Moulded Case Circuit Breaker

DZ15w moulded case circuit breaker is suitable for AC 50Hz circuits with a rated insulation voltage 400V, a rated working voltage 380V and below, and a rated current 6A to 100A. This series circuit breaker is used in power distribution networks for electrical energy distribution and for overload and short circuit protection of lines and electrical equipment. Under normal circumstances, circuit breakers can also be used for infrequent line conversion and for infrequent motor starts. It is widely used in temporary electricity places such as construction sites. Comply with standards: GB/T 14048.2, IEC 60947-2.

了解详情

DZ15LEw Residual Current Operated Circuit Breaker

DZ15LEw residual current operated circuit breaker is suitable for AC 50Hz circuits with a rated voltage of 220V or 380 and a rated current 6A to 100A for residual current protection, and it can also be used to prevent damage to the equipment insulation, thereby avoiding fire hazard caused by ground accident current, and to prevent the line from overload and short circuit, and it is also used as infrequent conversion of lines. Comply with standards: GB/T 14048.2, IEC 60947-2.

了解详情

JDT50 Combined Tower Light

Features of JDT50 combined tower light: Made of high-quality PC materials, sturdy and durable, without any transportation loss; High-quality LED clip used, with larger luminous flux and longer life; High-performance buzzer used, with larger alarm volume, work normally in noisy working conditions; With the working environment temperature ranged -25~55 °C, the product can work in extreme high temperature in summer and extreme low temperature in winter; IP54 without beep protection, suitable for outdoor applications thanks to its rainproof and dustproof features; Modular design, multiple specifications can be combined freely with unlimited expansion; Luminescence and sound way can be DIY adjusted as needed; Complete installation accessories for different occasions and different industry applications.

了解详情

JDS100 Monochrome Warning Light

JDS100 monochrome warning light features: Made of high-quality PC materials, sturdy and durable, without any transportation loss; High-quality LED clip used, with larger luminous flux and longer life; High-performance buzzer used, with larger alarm volume, work normally in noisy working conditions; With the working environment temperature ranged -25~55 °C, the product can work in extreme high temperature in summer and extreme low temperature in winter; IP54 without beep protection, suitable for outdoor applications thanks to its rainproof and dustproof features; Luminescence and sound way can be DIY adjusted as needed; Complete installation accessories for different occasions and different industry applications.

了解详情

DZ47TRLE Transparent Miniature Earth Residual Current Circuit Breaker

DZ47TRLE transparent small residual current circuit breaker is suitable for AC 50HZ low voltage terminal power distribution system with a rated voltage 230/400V and a rated current 6-60A, and has overload protection, short circuit protection, and leakage protection functions.

了解详情

DZ47TR Transparent Miniature Circuit Breaker

DZ47TR transparent miniature circuit breaker is suitable for AC 50HZ low voltage terminal power distribution system with a rated voltage 230V/400V and a rated current 6-63A, and has short circuit protection, overload protection, disconnection and control functions.

了解详情

CDF1 Load Disconnector

CDF1 series load disconnector products have 5 shell frames covering 10~150A current specifications, and it is widely used in power distribution system and automation system in many industries such as construction, electric power, and petrochemical. It is mainly used as main switch of machine tools, fans, and pumps, and can also be used as the start-stop switch of small-capacity motors. With disconnection function, the load switch can be used as a disconnector to isolate the off-power section from the energized part, and create a noticeable disconnection point to isolate failed equipment or cut off the power supply for maintenance.

了解详情

CDM3T Moulded Case Circuit Breaker

The new CDM3T series moulded case circuit breaker products are suitable for AC circuits with a rated working voltage AC400/415V and a rated current of 16-630A. With high-quality, transparent and visible products, provide stable electrical protection for temporary power consumption places in industry, commerce, civil buildings, and infrastructure. It is used for electric energy distribution and lines and power equipment protection to avoid damage caused by faults such as overload and short circuit.

了解详情

CDM3LT Residual Current Operated Circuit Breaker

The new CDM3LT series moulded case circuit breaker products are suitable for AC circuits with a rated working voltage AC400/415V and a rated current of 16-250A. With high-quality, transparent and visible products, stable electrical protection can be provided for temporary power consumption places in industry, commerce, civil buildings, and infrastructure for electric energy distribution and line and power equipment protection to prevent damage caused by overload, short circuit, or electric leakage faults.

了解详情

DDZY607 Single-Phase Remote Fee-Controlled Smart Power Meter

DDZY607 single-phase fee-controlled intelligent power meter is used to measure AC single-phase active energy with a rated voltage of 220V and a rated frequency of 50Hz, suitable for electricity consumption regulation according to the corresponding different electricity prices in the different electricity consumption periods to realize peak load shaving, and is used in the remote power sales management system.

了解详情

DZ47sGQF Automatic Recover Over/Under-Voltage Protector

Automatic recover over/under-voltage protector is a product for automatic control and protection of electrical equipment or household appliances when the power grid or power quality is unstable. It is mainly suitable for single-phase AC230V/or three-phase AC400V, 50Hz users or loads with a rated current 100A and below, such as user residential household line or single-phase electrical equipment and loads to be protected.

了解详情

CDKU-S Series Ultra-Thin Switching Power Supply

CDKU-S series products are single-output enclosed switching power supplies with 30mm ultra-thin design, and adopt 90-264VAC full range input voltage (toggle switch optional for 200W and 350W). Any set of 5V, 12V, 24V, 36V, and 48V single outputs (special requirements can be customized) can be selected. The product adopts full-metallized shell and honeycomb heat dissipation design with good heat dissipation performance; the product can work normally in the environment of -30℃ ~ 70℃ temperature and 20% ~ 90% RH relative humidity, with the efficiency up to 89% and the no-load power consumption as low as 0.2 ~ 1.0W, and they can meet international energy requirements.

了解详情

CDV2s Motor Circuit Breaker

With AC 50/60HZ, rated voltage up to 690V under the AC-3 use category, and setting current range 0.1A~32A, it can replace the combination of 3-pole circuit breaker and thermal overload relay functionally, and realize the short circuit, thermal overload, and phase loss protections of motor, and can also be used for infrequent line conversion or direct start of motor.

了解详情

P*606L Digital-Display Electrical Measuring Instrument

Navigator new 606 series digital display electrical measuring instrument product is a new and upgraded intelligent product launched by the company, and there are 8 product types: current, voltage, frequency, power, power factor, reactive power, combination table, and multi-function meter; 6 panel sizes (mm): 72:72×72, 6:80×80, 48:96×48, 96:96×96, 42:120×120, 482:48×48; it can perfectly replace 2222 series digital display meter products. The instrument has a RS485 communication interface, and a variety of extended function modules are available to realize the "four remote" (remote control, telemetry, remote signal, and remote adjustment) functions, meeting the intelligent needs of customers.

了解详情

DZ47PLEY-63 Earth Residual Current Circuit Breaker

DZ47PLEY-63 series earth residual current circuit breaker (RCBO) has overload, short circuit, leakage protection and isolation functions. The product features with small size and compact structure. When there is electric shock or the leakage current of the power grid exceeds the specified value, the series of products can quickly cut off the fault current in a very short time to protect the safety of people and electrical equipment. This series is suitable for infrequent power-on/off of electrical devices and lighting lines, especially for industrial and commercial lighting distribution systems.

了解详情

CDCE9 Series Low Voltage Smart Capacitor Compensation Device (Smart Capacitor)

With the low-voltage power capacitor as the main body, CDCE9 series low-voltage intelligent capacitor compensation device adopts the latest technological achievements such as microelectronic software and hardware technology, micro-sensing technology, micro-network technology, and electrical manufacturing technology for intelligence to realize the series functions such as low-voltage reactive power automatic compensation function and convenient switching, protection, measurement, signal, and connection functions. It is a major breakthrough in low-voltage reactive power automatic compensation technology, and can be used in various occasions of low-voltage reactive power compensation flexibly, changing the structural mode of existing low-voltage reactive power automatic compensation equipment.

了解详情

CDBH Miniature Circuit Breaker

了解详情

CDM6Ei Electronic Moulded Case Circuit Breaker

The new 6 series electronic moulded case circuit breaker CDM6Ei was launched in 2017 to realize a perfect upgrade of the product. The use of remote four-remote communication realizes intelligent interconnection; Support mobile APP communication and alarm non-trip function; the ultimate working temperature of product can reach -40°C~70°C.

了解详情

CDM6Z DC Moulded Case Circuit Breaker

CDM6Z DC moulded case circuit breaker has a rated voltage DC 250V/500V/750V/1000V and a rated current ranged 63A ~ 800A. With a new arc extinguishing and contact design, this series can be efficiently and perfectly used in the DC application environment, widely suitable for DC applications such as photovoltaic power generation, OEM DC screen, power plant, charging pile, communication industry, and rail transit for electric energy distribution and for line and power equipment protection to avoid risks caused by overload or short circuit fault. Note: The series copper busbar is an optional accessory, and its picture is for reference only and the actual product will prevail.

了解详情

CJX2s AC Contactor

The new CJX2s series motor control and protection products are products with convenient operation and country leading quality, suitable for automatic production and testing equipment using a new generation of technology platform to effectively meet the actual application needs of customers. The series includes five series and their accessories including CJX2sAC contactor, JRS1Dsp thermal overload relay, JZC4s contactor relay, CDC19s switching capacitor contactor, and CDS2s electromagnetic starter.

了解详情

JRS1Dsp Thermal Overload Relay

The new CJX2s series motor control and protection products are products with convenient operation and country leading quality, suitable for automatic production and testing equipment using a new generation of technology platform to effectively meet the actual application needs of customers. The series includes five series and their accessories including CJX2s AC contactor, JRS1Dsp thermal overload relay, JZC4s contactor relay, CDC19s capacitor changeover contactor, and CDS2s electromagnetic starter.

了解详情

CDQ3H Series (Moulded Case Type) Dual Power Automatic Transfer Switching Equipment

To realize automatic switching between normal power supply (I) and standby power supply (I) (manual switching can also be set). The power supply can be automatically switched due to power failure or abnormality (undervoltage, overvoltage, or voltage loss) of one power supply to ensure the continuity, reliability and safety of power supply. The current capacity is 63, 100, 250, 400, 630A, 800A, and the electric operating mechanism adopts the motor (single-phase AC) to realize the power supply switching through the power-on/off actions driven by the forward and reverse rotation of the motor.

了解详情

CDC6i AC Contactor

It is suitable for AC 50Hz/60Hz power system with a rated working voltage up to 690V, and a rated operating current up to 95A at the rated operating voltage 380V under the AC-3 use category for remote connection and disconnection of circuit. It is recommended to combine with the CDR6i thermal overload relay to form an electromagnetic starter to protect circuits where may be overloaded.

了解详情

CDR6i Thermal Overload Relay

The new CDC6i series motor control and protection products are products with convenient operation and country leading quality, suitable for automatic production and testing equipment using a new generation of technology platform to effectively meet the actual application needs of customers. The series includes five series and their accessories including CDC6i AC contactor, CDC6F high current contactor, CDR6i thermal overload relay, CDZ6i contactor relay, and CDP6 motor circuit breaker.

了解详情

CDB6LEi-125 High-Current Earth Residual Current Circuit Breaker

了解详情

CDB6LEi Miniature Residual Current Operated Circuit Breaker

了解详情

DZ47PLES-40 "Phase Line + Neutral Line" Earth Residual Current Circuit Breaker

DZ47PLES-40 earth residual current circuit breaker is mainly suitable for AC 50Hz or 60Hz circuits with a rated voltage 230Vand a rated current up to 40A for personal electric shock and equipment leakage protection, and has overload and short circuit protection function. It can be used to infrequently power on/off the electrical devices and lighting circuits under normal conditions, especially suitable for industrial and commercial lighting distribution systems. The products comply with GB16917.1 and IEC61009-1 standards.

了解详情

DZ47L Leakage Protection Switch

DZ47L leakage protection switch is suitable for AC 50/60Hz line with a rated voltage 230V for two-pole or a rated voltage 400V for four-pole and with a rated current up to 100A. When the electric shock occurs or the grid leakage current exceeds the specified value, the earth residual current circuit breaker can work to quickly cut off the fault current in a very short time to protect the safety of people and electrical equipment, and it can also be used for infrequent conversion of the line and for infrequent start of the motor. Products are suitable for many places such as industrial, commercial, high-rise and residential buildings.

了解详情

CDS2s Electromagnetic Starter

The electromagnetic starter is mainly used for the control of the direct start and stop of AC 50HZ (or 60HZ) three-phase cage induction motor, and for overload protection of motor.

了解详情

CJX2-Z DC Operated AC Contactor

了解详情

CDJD6 Residual Current Operated Relay

With residual current (leakage) operating value adjustable and rated breaking time adjustable, CDJD6 residual current operated relay can be used for multi-level protection, expand the protection range. It has transformer self-test function and various output control methods (basic, energy-saving, and passive).

了解详情

F4 Series Auxiliary Contacts

了解详情

FD6 Series Auxiliary Contacts

了解详情

CRT16-00 DC Fuse

CRT16-00 DC fuse is suitable for distribution lines with a rated voltage not exceeding DC80V, a rated current not exceeding 600A, and a rated short circuit capacity not exceeding 25kA for short-circuit protection, and mainly used in power distribution systems such as power supply cabinets and distribution cabinets in the communication industry.

了解详情

CDDB Rail Type Transformer

The main function of CDDB series DIN rail control transformer is voltage conversion to convert conventional alternating current into any voltage required by electronic and electrical equipment or users. It is suitable for various rail installation occasions, industrial control automation, distribution boxes, complete sets of cabinets, low-power power supply places as a power supply of control circuits, lighting currents, and signal circuits and as power supply of electronic equipment.

了解详情

CDK 122 Extension Cord Socket (New GB)

了解详情

NBZ-Series Pure Sine Wave Inverter

Widely used in solar power generation systems, new energy storage systems, household appliances, and industrial automation equipment systems to provide an ideal second energy AC power supply for household appliances such as TVs, refrigerators, induction cookers, electric fans, microwave ovens, and air conditioners.

了解详情

NBC Series On-Board Inverter

This onboard inverter has the advantages of small size, light weight and high efficiency to convert the car DC 12V or 24V to AC 110V / 220V; insert the product’s cigarette butt into the car cigarette hole to invert an ideal AC power supply; it is a portable DC-converted-AC power supply product.

了解详情

HD18 Photovoltaic Special Disconnector

HD18-63~125 is a new generation of switch disconnectors newly designed by our company, featuring with artistic appearance, compact structure, small size, high protection and safety. With rated insulation voltage AC up to 1000V, rated frequency 50Hz, rated working voltage AC 400V/690V, and rated working current up to 125A, it is primarily used for power distribution circuits for power isolation.

了解详情

CDLD6H Indicator

了解详情

LD11s Indicator

了解详情

CDBA(Z)-63B Special Application IOT Circuit Breaker

了解详情

CDQB Wall Heating Power Control Box

CDQB wall heating power control box has an applicable power of 1000W~5000W. As a special power supply box of paint wall heating, it can convert the household single-phase AC 220V voltage into a low-voltage AC safety voltage (common voltages 24V and 36V) for heating in indoors civil, commercial, and industrial heating places such as various carbon nano, graphene, carbon fiber heating paint wall heating and floor heating.

了解详情

CDJL Series Machine Tool AC Reactor

The machine tool AC reactor is designed mainly for the characteristics of machine tools as its accessory, such as CNC machine tools, inverters, and servo drives. It is used to limit the voltage drop on the grid side during the phase conversion of frequency conversion and AC device, and to suppress harmonics and decouple the parallel converter, as well as to limit the grid voltage jumps or current surges generated during the operation of grid system. The product has advantages of protection grade IP21, small size, small loss, low temperature rise, low noise, and simple installation.

了解详情

CDB6PLEiN

了解详情

CDB6PiN

了解详情

P*606E Digital-Display Electrical Measuring Instrument

Delixi P*606E digital display electrical measuring instrument includes 8types namely three-phase multi-function meter, single-phase multi-function meter three-phase ammeter, three-phase voltmeter, single-phase ammeter, single-phase voltmeter, DC ammeter, and DC voltmeter, with 6 panel sizes (mm): 72:72×72, 6:80×80, 48:96×48, 96:96×96, 42:120×120, 482:48×48, suitable for measuring electrical parameters such as voltage, current, power, power factors, phase, and frequency in DC circuit and power frequency AC circuit, and can display the change trends of measured data. In addition to single use, it is mainly used as matched instrument panel for various high and low voltage switchgear, power cabinet, control cabinet, and a variety of electronic control devices.

了解详情

CDB6HLES-63

了解详情

CDB6H-80 Miniature Circuit Breaker

了解详情

CDB6HTC-63

了解详情

CDB6H-63 Miniature Circuit Breaker

了解详情

CDM3G Disconnector

CDM3G series moulded case disconnectors used in distribution networks mainly for infrequent connection and disconnection of circuits for isolation of power supply. It is widely used in low-voltage power places such as electricity, construction, industry, and OEM. Frame size: 63AF 125AF 160AF 250AF 400AF Pole number: 3P, 4P

了解详情

CDMA-250G

了解详情

CDH7-16~100 Series Disconnector

1. The overall dimension of the product is smaller than those of the similar products in the market; 2. CDH7 products can be used in DC circuits and photovoltaic power grids; 3. The mechanical life is twice that of similar products in the market; 4. The temperature rise of the product is lower than that of the same type of HGL products about 5K.

了解详情

New GeneratioN DDSU6606V Series Single-Phase Electronic Power Meter (2P Rail)

It is widely used in various electric energy metering places, such as small three boxes, distribution boxes, car charging piles, and power exchange cabinets, and can be used in electric energy measurement and assessment in rental houses, long-term rental apartments, large-scale public buildings, residential properties, schools and factories.

了解详情

CDMNEZ DC Moulded Case Circuit Breaker

CDMNEZ DC moulded case circuit breaker is suitable for DC circuit with a rated voltage DC1500V and a rated current 200A~630A, and can be widely used combiner box, inverter, and energy storage system in photovoltaic power generation and energy storage industry for electric energy distribution and for line equipment protection to avoid hazards caused by faults such as overload and short circuit.

了解详情

MX+OFWY9 Passive Shunt + Auxiliary

MX+OFWY9 is primarily assembled with CDB9 series circuit breakers to realize remote operation control.

了解详情

MVMN9 Over/Under-Voltage Protection Accessories

MVMN9 is primarily assembled with CDB9 series circuit breakers to realize over-voltage and under-voltage protection.

了解详情

MV9 Overvoltage Protection Accessories

MV9 is primarily assembled with CDB9 series circuit breakers to realize overvoltage protection.

了解详情

MSN9 No-Voltage Protection Accessories

MSN9 is primarily assembled with CDB9 series circuit breakers to realize voltage loss protection.

了解详情

MN9 Undervoltage Protection Accessories

MN9 is primarily assembled with CDB9 series circuit breakers to realize undervoltage protection.

了解详情

MX+OFWY6 Passive Shunt + Auxiliary

MX+OFWY6 is primarily assembled with CDB6 series circuit breakers to realize remote operation control.

了解详情

MVMN6 Over/Under-Voltage Protection Accessories

MVMN6 is primarily assembled with CDB6 series circuit breakers to realize over-voltage and under-voltage protection.

了解详情

MV6 Overvoltage Protection Accessories

MV6 is primarily assembled with CDB6 series circuit breakers to realize overvoltage protection.

了解详情

MSN6 No-Voltage Protection Accessories

MSN6 is primarily assembled with CDB6 series circuit breakers to realize voltage loss protection.

了解详情

MN6 Undervoltage Protection Accessories

The MN6 is primarily assembled with the CDB6 series circuit breaker to realize undervoltage protection.

了解详情

MX+OFWY3 Passive Shunt + Auxiliary

MX+OFWY3 is primarily assembled with DZ47 series circuit breakers to realize remote operation control.

了解详情

MVMN3 Over/Under Voltage Protection Accessories

MVMN3 is primarily assembled with DZ47 series circuit breakers to realize over-voltage and under-voltage protection.

了解详情

MV3 Overvoltage Protection Accessories

The MV3 is primarily assembled with DZ47 series circuit breakers to realize overvoltage protection.

了解详情

MSN3 Overvoltage Protection Accessories

The MSN3 is primarily assembled with DZ47 series circuit breakers to realize voltage loss protection.

了解详情

MN3 Undervoltage Protection Accessories

The MN3 is primarily assembled with DZ47 series circuit breakers to realize undervoltage protection.

了解详情

JKL5CV/JKL2CV Intelligent Reactive Power Automatic Compensation Controller

JKL5CV/JKL2CV intelligent reactive power automatic compensation controller is mainly suitable for capacitor compensation device of low-voltage distribution system for automatic adjustment, making the power factor reach the user's predetermined state, increasing the utilization power of the power transformer, reducing line loss, and improving the power quality of power supply.

了解详情

Bod Series Ring Transformer

BOD toroidal transformer is a large type of electronic transformer, featuring with high efficiency, low loss, low temperature rise, small magnetic leakage, and small size, and it has been widely used in household appliances and other electronic equipment with high technical requirements, and it is mainly used as power transformer and isolating transformer.

了解详情

US-52 Single Phase Motor Speed Governor

US-52 single-phase motor governor is suitable for AC 50Hz single-phase speed regulation motors with rated voltage up to 220V and control power 250W and below to realize feedback constant speed and stepless speed regulation functions.

了解详情

LMK6N Series Current Transformer

The open-end current transformer is mainly used in power distribution system transformation projects. It can be directly inserted on the copper bar without removal of screws and primary busbar with more convenient and faster installation. It is used in the AC lines with rated frequency 50-60Hz and rated operating voltage 0.66kV and below for current measurement and relay protection.

了解详情

CDBALE IOT Miniature Earth Residual Current Circuit Breaker

了解详情

CDBA IOT Miniature Circuit Breaker

了解详情

CDB6i-80 Miniature Circuit Breaker

了解详情

CDQCGFK Card Sender

This card sender is suitable for sending cards for CDQC-1SW and CDQC-2SW series automotive AC charging pile products. This sender shall work together with a dedicated card sending software.

了解详情

CDQCFK Card Sender

This card sender is suitable for sending cards for CDQC-1/2S□□-G series automotive AC charging pile, CDZC-12-PA series intelligent charging station, and CDZC-2SW series intelligent charging station products. This sender shall work together with a dedicated card sending software.

了解详情

FF9 Dual Auxiliary Contacts

FF9 series auxiliary contacts (auxiliary contacts with alarm function) are mainly used in AC 50/60Hz alarm circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can realize the opening and closing indication of remote circuit breaker by remotely connecting signal lights.

了解详情

FS9 Auxiliary + Alarm Contacts

FS9 series auxiliary contacts (auxiliary contacts with alarm function) are mainly used in AC 50/60Hz alarm circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can realize the opening and closing indication of remote circuit breaker by remotely connecting signal lights, and also realize the fault trip alarm function of remote circuit breaker by remotely connecting an alarm.

了解详情

MX+OF9 Shunt Release

MX+OF9 is mainly assembled with CDB9 series circuit breakers to realize remote operation control.

了解详情

SD9 Alarm Contact

SD9 series auxiliary contacts are mainly used in AC 50/60Hz auxiliary circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can remotely display the fault trip alarm function of remote circuit breaker by remotely connecting an alarm.

了解详情

OF9 Auxiliary Contact

OF9 series auxiliary contacts are mainly used in AC 50/60Hz auxiliary circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can remotely display the opening and closing status of the circuit breaker by remotely connecting signal lights.

了解详情

The FF6 Dual Auxiliary Contacts

FF6 series auxiliary contacts (with 2 sets of auxiliary contacts) are mainly used in AC 50/60Hz alarm circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can realize the opening and closing signal indication of remote circuit breaker by remotely connecting signal lights.

了解详情

FS6 Auxiliary + Alarm Contacts

FS6 series auxiliary contacts (auxiliary contacts with alarm function) are mainly used in AC 50/60Hz alarm circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can realize the opening and closing indication of remote circuit breaker by remotely connecting signal lights, and also realize the fault trip alarm function of remote circuit breaker by remotely connecting an alarm.

了解详情

MX+OF6 Shunt Realease

MX+OF6 is mainly assembled with CDB6 series circuit breakers to realize remote operation control.

了解详情

OF6 Auxiliary Contact

OF6 series auxiliary contacts are mainly used in AC 50/60Hz auxiliary circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can remotely display the opening and closing status of the circuit breaker by remotely connecting signal lights.

了解详情

SD6 Alarm Contacts

SD6 series auxiliary contacts are mainly used in AC 50/60Hz auxiliary circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can remotely display the fault trip alarm function of remote circuit breaker by remotely connecting an alarm.

了解详情

MX+OF3 Shunt Release

MX+OF3 is mainly assembled with DZ47 series circuit breakers to realize remote operation control.

了解详情

FS3 Auxiliary Alarm Contacts

FS3 series auxiliary contacts (auxiliary contacts with alarm function) are mainly used in AC 50/60Hz alarm circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can realize the opening and closing indication of remote circuit breaker by remotely connecting signal lights, and also realize the fault trip alarm function of remote circuit breaker by remotely connecting an alarm.

了解详情

FF3 Dual Auxiliary Contacts

FF3 series auxiliary contacts (with 2 sets of auxiliary contacts) are mainly used in AC 50/60Hz alarm circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can realize the remote opening of circuit breaker and the signal indication through the remote connection of signal lights.

了解详情

OF3 Auxiliary Contact

OF3 series auxiliary contacts are mainly used in AC 50/60Hz auxiliary circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of auxiliary contacts can remotely display the opening and closing status of the circuit breaker by remotely connecting signal lights.

了解详情

SD3 Alarm Contacts

SD3 series auxiliary contacts are mainly used in AC 50/60Hz alarm circuits with a rated voltage not exceeding 415V and a rated current 1A~6A. This series of alarm contacts can realize the fault trip alarm function of remote circuit breaker by remotely connecting the alarm.

了解详情

CDWNEGZ DC Disconnector

CDWNEGZ DC type switch disconnector is suitable for applications with rated current 630~4000A and rated operating voltage DC750V-DC1500V; it is mainly installed in low-voltage distribution circuit to turn on and off main circuit for isolation. It is widely used in centralized photovoltaic and energy storage industries.

了解详情

CDEV6i New Energy DC Contactor

CDEV6i series high-voltage DC contactors are mainly used in the new energy-related infrastructure such as electric vehicle charging piles, automotive battery power distribution systems, and solar power generation equipment, and in the inverter power control, high-power DC equipment, power supply/motor control of general industrial equipment, circuit insulation, circuit protection, and safety devices.

了解详情

CDC6D Series Charging Pile AC Contactor

CDC6D is a new AC contactor developed for the charging pile industry with low temperature rise, wide voltage suction, and small size, suitable for equipment with AC-1 load and not high suction frequency requirements.

了解详情

IP67 Industrial Plug & Socket (DEPU Series)

It is suitable for temporary power consumption scenarios with higher requirements for function and safety. New integrated design is adopted for strong protection. The use of safe and reliable materials ensures long-lasting durability even in harsh environments. This product is mainly used in industry, workshop/port, shipyard/chemical industry.

了解详情

IP44 Industrial Plug & Socket (DEPU Series)

It is suitable for temporary power consumption scenarios with higher requirements for function and safety. New integrated design is adopted for strong protection. The use of safe and reliable materials ensures long-lasting durability even in harsh environments. This product is mainly used in industry, workshop/port, shipyard/chemical industry.

了解详情

CDYNEZ DC Surge Protective Device (DC1500V)

In order to meet the needs of new energy industries such as photovoltaic and energy storage, our company launched DC surge protector CDYNEZ products; this specification product has the maximum sustainable working voltage of DC1500V, and can carry up to 40kA discharge current for better guaranteeing the safety of photovoltaic storage and distribution system. The product complies with CQC, CE, RoHS (optional) requirements.

了解详情

CDSD3M

CDSD3M is a miniature inverter developed for channel customers, with simple operation and strong universality. It is an equipment mainly used in woodworking, food & packaging, conveyor lines, and fan water pumps.

了解详情

HD11-T Series Disconnector

HD11-T series disconnector has a rated insulation voltage 1140V, a rated frequency 50Hz, a rated working voltage up to to AC400/690V/1140V, and a rated working current up to 630A, and it is mainly used for power distribution circuits for power isolation.

了解详情

CDSD6HM Inverter

CDSD6HM series inverter is a compact inverter developed for OEM industries such as woodworking, food & packaging, conveyor line, and fan water pump, featuring with small size, high overload capacity, simple operation, and flexible configuration; it is primarily suitable for equipment with simple speed regulation required.

了解详情

CDRU Series Thermal Overload Relay

The new CDRU series thermal overload relay series products are suitable for AC 50Hz/60Hz power system with rated operating voltage up to 690V and with rated operating current up to 95A at the rated operating voltage 380V under the AC-3 use category for remote turn on and off circuits. It is recommended that it is combined with the CDR6i thermal overload relay to form an electromagnetic starter to protect circuits that may be overload.

了解详情

CDCU Series Contactors

The new CDCU series of motor control and protection products is the products with convenient operation and leading quality in China, and they are manufactured with a new generation of technology platform using the automation product and testing equipment and focusing on the actual application needs of customers

了解详情

CDBNE-100GQF Photovoltaic Grid-Connected Circuit Breaker

CDBNE-100GQF photovoltaic grid-connected circuit breaker (hereinafter referred to as circuit breaker) is suitable for distributed photovoltaic household grid-connected box. The circuit breaker detects and judges the voltage on the photovoltaic power generation side for automatic opening delay in case of faults such as overvoltage, undervoltage or voltage loss, and for automatic closing operation when the voltage restores to normal. Meanwhile, the circuit breaker has also short-circuit protection, overload protection and isolation functions of the lines. The product is suitable for lines with a rated frequency 50/60Hz, a rated working voltage 230/400V, and a rated working current 100A and below.

了解详情

CDLX6i Travel Switch

CDLX6i travel switch is mainly suitable for 50Hz/60Hz electrical lines with rated operating voltage AC380V, DC220V and below, and used in three-dimensional garages, plastic machines, printing and packaging, automatic assembly equipment, textile machinery, and food fields.

了解详情

CDLX6H Travel Switch

CDLX6H travel switch is mainly suitable for 50Hz/60Hz electrical lines with rated operating voltage AC380V, DC220V and below, and used in three-dimensional garages, plastic machines, printing and packaging, automatic assembly equipment, textile machinery, and food fields.

了解详情

CDQ6i Series Dual Power Automatic Transfer Switching Equipment

CDQ6i series PC-level automatic transfer switching equipment is suitable for AC 50Hz three-phase four-wire power supply and distribution system with a rated working voltage AC-400V, and a rated working current from 16~3200A, and also for AC230V single-phase two-wire power distribution system with a rated working current of 16~250A. CDQ6i products realize the closing and opening switching between the normal contact and the standby contact through the forward and reverse rotation of single-phase AC motors, thereby guaranteeing the continuity, reliability and safety of electricity.

了解详情

CDM6HL Residual Current Operated Circuit Breaker

CDM6HL series residual current operated circuit breaker (hereinafter referred to as: CDM6HL) has its main function to provide indirect contact protection for personal electric shock that causes fatal danger, and to provide protection for electrical fire caused by ground fault current, such as insulation damage. It can provide the protection of circuits and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line.

了解详情

CDM6HE Electronic Moulded Case Circuit Breaker

CDM6HE electronic moulded case circuit breaker can realize remote four-remote communication of products and realize intelligent interconnection, and support mobile APP communication and alarm non-trip function; The ultimate use temperature of the product can reach -40°C~70°C.

了解详情

CDM6H Moulded Case Circuit Breaker

CDM6H series moulded case circuit breaker (hereinafter referred to as: CDM6H) is a mechanical switch used in the low-voltage distribution line can power on, carry and power off the current under normal circuit conditions, can also power on and carry the current for a certain time and power off the current for protection of lines and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line.

了解详情

KG-WiFi Intelligent Time Control Switch

KG-WiFi intelligent time control switch is suitable for AC 50Hz control circuit with voltage 220V as a delay timing component to turn on or off the power supply of various control circuits according to the predetermined time through the mobile APP. It has complete functions such as countdown, cycle timing, and power display, suitable for street lights, neon lights, advertising sign lights, radio and television equipment and various household appliances.

了解详情

JSS48A-R Series Time Relay

JSS48A-R, 2ZR series time relay is suitable for AC 50Hz/60Hz and DC control circuit, and used in the control circuit with AC voltage up to 220V or DC voltage up to 110V as a time control element to connect or disconnect circuits according to the predetermined time. It is an upgrade product of the ordinary time relay, and has a RS485 interface to realize communication with background equipment and realize remote monitoring function.

了解详情

JGX-13F, 52P Series Solid State Relays

JGX-13F, 52P series solid state relay is an upgrade product of electromagnetic relay JQX-13F, 52P; the product has a series of advantages of fast switching speed, high working frequency, long service life, low noise and reliable action, and no spark. It replaces electromechanical relays and is widely used in digital program control devices, motor control devices, temperature control devices, data processing systems and computer terminal interface circuits, especially suitable for special occasions with frequent actions, explosion resistance, moisture resistance, and corrosion resistance.

了解详情

CDB9SRC Power Meter External Circuit Breaker

The external circuit breaker of power meter is suitable for the information collection system management of the State Grid and the South Grid to control the ON/OFF action remotely according to the balance of the user's electricity account. It receives the signal from the intelligent meter to turn off circuits (unpaid power outage), and automatically power on (power transmission after payment) to close the circuit! It can feedback the status of circuit breaker to the power meter and the background!

了解详情

CDBUPLE-63 Phase Line + Neutral Line Earth Residual Current Circuit Breaker

了解详情

CDBULES Miniature Earth Residual Current Circuit Breaker

了解详情

CDBUPLE-40 Phase Line + Neutral Line Earth Residual Current Circuit Breaker

了解详情

CDBULE Miniature Earth Residual Current Circuit Breaker

了解详情

CDBUP Phase Line + Neutral Line Circuit Breaker

了解详情

CDBU Miniature Standard Circuit Breaker

了解详情

CDXQC-16 Portable Car Charger

CDXQC-16 portable car charger is mainly composed of 16A plug, control box, cable, and charging gun. It is a convenient portable electric vehicle charging equipment to safely and conveniently charge the pure electric vehicles or plug-in hybrid vehicles in any place where there is a standard power interface.

了解详情

CDQC-G Series Automobile AC Charging Pile

CDQC-G series automotive AC charging pile is composed of main control unit, human-computer interaction, AC power distribution, output control, and chassis. The product provides three charging modes: card payment, QR payment and direct charging. It is widely used in many places such as various large, medium and small public parking lots, new commercial area parking lots, company units and internal parking lots of community, private parking spaces, and charging pile operating enterprises.

了解详情

DELIXI Electric Cloud Platform Power Management System

Delixi Electric cloud platform power management system has functions of realizing remote payment of users' electricity bills and automatic meter reading management, realizing remote automatic meter reading, prepaid or postpaid, statistics and analysis. The system adopts cloud server mode. The meter adopts RS485 bus to wireless gateway mode that is a smart meter remote centralized reading management system independently developed by Delixi Electric, and has system parameter setting, account opening, meter allocation, recharge, meter replacement, account cancellation, query, and report functions, as well as system data backup and recovery function and user management function. Delixi cloud platform electric energy management system consists of three parts: cloud server, intelligent gateway and smart meter.

了解详情

HH15-630T Switch-Disconnector-Fuse

HH15-630T series disconnector fuse set is suitable for low-voltage power distribution system with a rated frequency 50Hz, a rated insulation voltage up to 1000V, a rated working voltage up to AC400V/690V, and a rated working current up to 630A as power switch, switch disconnector and emergency switch with short circuit and overload protection function for circuit protection.

了解详情

CDB6LESi Miniature Earth Residual Current Circuit Breaker

了解详情

CDKW-S Waterproof Switching Power Supply

CDKW-S series products are single-output glue-filled enclosed switching power supplies with glue filling and waterproofing appearance design; the waterproof grade can reach PI67, the product input voltage is side, and the product is easily installed. The whole series provides 5V, 12V, 24V, 36V, and 48V output, (special requirements can be customized). This series of products has the efficiency up to 90% with metallized shell design and good heat dissipation performance, and the product can work in the temperature range of -30℃ to +60℃. The whole series of products has ultra-low no-load and no-consumption, making the terminal system meet the international energy requirements. The product design conforms to the safety regulations of TUV EN60950-1 EN60335-1 EN 61558-1/-2-16.

了解详情

CDZC-2SW Series Smart Charging Station

CDZC-2SW intelligent charging station has 2 operating modes: standalone version and extension version; the standalone version has a communication module, and can be used separately or centrally arranged, so it is more suitable for use in decentralized sites; the extension version is composed of multiple extension type charging stations and a communication concentrator. Connected to multiple extensions (up to 50 extensions) by a communication concentrator through the network connection, it is suitable for layout of 10-100 large-scale charging station ports, covering the underground parking lot of the general community. It is widely used in many places such as various large, medium and small public parking lots, new commercial area parking lots, company units and internal parking lots of the community, private parking spaces, and charging pile operating enterprises.

了解详情

CDLA6H Pushbutton Switch

CDLA6H button is suitable for the AC 50/60HZ mechanical equipment with rated voltage 380V and 220V or AC and DC rated voltage 220V and below as switching control. This product belongs to the industrial equipment and switch category of industrial control products.

了解详情

CDSD6H Series Inverter

With function configuration optimized according to the most commonly used practical applications of industrial customers, the new CDSD6H inverters accurately matches the needs of industrial customers to provide the supports for industrial control field!

了解详情

CDB6iZ DC Miniature Circuit Breaker

了解详情

CDWBS Temperature Transmitter

CDWBS temperature transmitter receives signals from the thermal resistance (RTD), and thermocouple (TC), and converts various temperature signals into linear 4~20mA signals, and outputs them. The input signal can be configured via PC, and is mainly used for measuring and controlling temperature parameters in industrial processes. It is widely used in industrial and scientific research fields such as metallurgy, petroleum, chemical machinery, instrumentation, chemical fiber, textile, construction materials, electric power, medical engineering, food processing, and aviation, especially suitable for computer measurement and control system, and can be used together with instruments.

了解详情

DZ47SCB Special Protection Device For Surge Protective Device

DZ47SCB series surge protector special protection device is connected in SPD loop in series to realize the function of quickly cutting off power frequency small current and high current lightning strike without trip using internal current sorting channel device. Compared with conventional backup protection devices, it has advantages of higher breaking capacity and better surge shock tolerance, and of realizing quick-cut of low short-circuit current.

了解详情

DZ47sY Surge Protective Device

DZ47sY series surge protective device is mainly used in AC 50Hz/60Hz single-phase/three-phase power distribution system with a rated voltage 230V/400V to suppress transient overvoltage, discharge surge energy, and prevent or reduce the damage caused by transient overvoltage due to lightning strikes or operation.

了解详情

DZ47sLES Miniature Earth Residual Current Circuit Breaker

DZ47sLES compact earth leakage circuit breaker is a new series of products carefully developed with integrating innovative technology. This product features with a narrower width, more convenient wiring, more comprehensive protection and more stable performance! It can be suitable for AC 50/60Hz lines with a rated voltage 230V/400V and a rated current 63A and below, with electric leakage, overload, and short circuit protection functions.

了解详情

CDM3LS Residual Current Operated Circuit Breaker

The Navigator series new CDM3LS residual current operated circuit breaker has its main function to provide indirect contact protection for personal electric shock that causes fatal danger, and to provide protection for electrical fire caused by ground fault current, such as insulation damage. It can provide the protection of circuits and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line, and is widely used in low-voltage power places such as electric power, construction, industry, and OEM.

了解详情

CDM3S Moulded Case Circuit Breaker

The Navigator series new CDM3S moulded case circuit breaker is a mechanical switch used in the low-voltage distribution line can power on, carry and power off the current under normal circuit conditions, can also power on and carry the current for a certain time and power off the current for protection of lines and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line. It is widely used in low-voltage power places such as electricity, construction, industry, and OEM.

了解详情

CDPZ30v Lighting Distribution Box

了解详情

DBTS Series Moulded Case Circuit Breaker

了解详情

CDH15D Electric Switch-Disconnector-Fuse

CDH15D series electric disconnector fuse set has a rated insulation voltage 1000V, a rated frequency 50Hz, a rated working voltage to AC400/690V, and a rated working current to 1250A, and is mainly used in power distribution circuit for power isolation and power conversion isolation.

了解详情

MTC/MTX Series Thyristor Modules

MTC, MTX series thyristor module is a switching element, and can work under high voltage and high current conditions, and its working process can be controlled. With high-power thyristor chip or rectifier chip as the core, two chips are combined into a module according to a certain circuit structure to realize switching and voltage regulation function. It is widely used in circuits of industrial heating control, AC voltage regulation, motor control, contactless switch, reactive power compensation, inverter and frequency conversion, and battery charge and discharge. The product has advantages of reliable operation, long serve life, no noise, no contact, no spark, no electromagnetic interference, fast switching speed, strong anti-interference ability, small size, impact resistance, oscillation resistance, explosion-proof, moisture-proof, and anti-corrosion features.

了解详情

CDDKQ Series Control Transformer

CDDKQ series control transformer is mainly used in crane control system, and is a special product for crane control cabinet. It converts the 50Hz/60Hz AC rated power supply voltage into the AC voltage required by the control appliance in the control system to supply the power for control appliance in the control cabinet.

了解详情

CDQ1F Series Dual Power Automatic Transfer Switching Equipment

CDQ1F type PC class automatic transfer switching equipment is composed of a load disconnector (no overload and short circuit protection mechanism) and an intelligent controller. The switch adopts excitation conversion mechanism with a faster conversion speed, and can turn on/ off and carry a larger working current; furthermore, a new microcomputer control system is adopted, featuring with a more intelligent monitoring and control, strong electromagnetic compatibility, long-term continuous operation, stability and reliability. Meanwhile, the switch is equipped with LED light/LED digital tube/LCD display for simple operation and clear indication, providing users with a friendly man-machine interface.

了解详情

CDM6ZB DC Moulded Case Circuit Breaker

CDM6ZB DC moulded case circuit breaker is suitable for DC circuit with a rated working voltage DC125V, DC250V and a rated current 63A ~ 800A, and can be widely used in DC environments such as photovoltaic power generation, charging pile, power plant, power supply, rail transit, and communication for electric energy distribution, line and power equipment protection to avoid hazard due to faults such as overload and short circuit. This series of products has a short-circuit short-delay function, and can comprehensively improve the distribution and management efficiency of electric energy.

了解详情

CDB9ZB Three-Stage DC Miniature Circuit Breaker

了解详情

New Generation DT/SSU6606V Series Three-Phase Electronic Power Meter (4P Rail)

Delixi new generation DT/SSU6606v series three-phase electronic power meter (rail) is suitable for AC circuit for measurement of power parameters such as voltage, current, power, power factor, and frequency, and is used to meter the electric energy in the measured circuit. It is widely used in various electric energy measurement places such as car charging piles, power exchange cabinets, and distribution boxes, and can be used for internal electric energy measurement and assessment in large public buildings, residential areas, industrial and mining enterprises, schools and hospitals.

了解详情

CDM6EL Residual Current Operated Circuit Breaker

了解详情

CDQC Series Car AC Charging Pile

This product is composed of main control unit, human-computer interaction, AC power distribution, output control, and chassis, and there are three charging modes of card payment, QR payment and direct charging. This product is widely used many places such as large, medium and small public parking lots, new commercial area parking lots, company units and parking lots in community, private parking spaces, and charging pile operating enterprises.

了解详情

CDCE3 Series Low-Voltage Smart Capacitor Compensation Device

CDCE3 series low-voltage intelligent capacitor compensation device (hereinafter referred to as intelligent capacitor) is a new compensation device that can realize the reactive power compensation for 0.4kV low voltage lines with microelectronic software and hardware technology based the self-healing low-voltage power capacitor as main body and the intelligent measurement and control processor as the control center. With the zero-crossing switching technology, it can greatly reduce the inrush current generated when switching capacitors, protecting the compensation system and extending the service life of capacitors and switching switches.

了解详情

JQX-62F Series High Power Electromagnetic Relay

JQX-62F series electromagnetic relay is suitable for electronic control equipment, household appliances, smart home, office automation, security series, commercial machinery, communication equipment, automobiles, machine tools, construction, transportation equipment, and instrumentation, and can be used as remote control intermediate conversion or amplification element. Its lead terminal spacing and external dimensions have been standardized and are universal at home and abroad. It is suitable for control and start-stop control of rear window mist eliminator, battery circuit breaker, automotive air conditioner, oil pump controller, fog lamp, cooling fan control, and headlight.

了解详情

KG316TU Time Control Switch

The time control switch KG316TU is used in the AC 50HZ automatic control circuit with rated control power supply voltage 380V and below as a time control element to turn on or off circuits according to the predetermined time; it is used for scheduled connection and disconnection control of street lights and advertising light boxes.

了解详情

CDP6-32 Motor Circuit Breaker

It is suitable for AC 50/60HZ application with a rated voltage up to 690V under the AC-3 use category and with a setting current range 0.1A~32A; it can replace the combination of 3-pole circuit breaker and thermal overload relay functionally to realize the motor protection in case of short circuit, thermal overload, and phase loss, and is also used for infrequent line conversion or direct start of motor.

了解详情

CDYN Surge Protective Device

了解详情

New Generation DTS606/DSS606 E Series Three-Phase Electronic Power Meter

The new generation DTS606/DSS606 E series three-phase electronic power meter is an active power meter designed and developed to adapt to the power grid transformation. It features with high accuracy and reliability. It is mainly used in three-phase power grids with a reference frequency of 50Hz, and is the most ideal choice for enterprises, substations or power plants where active power evaluation is required, and is also suitable for transmission and distribution or distribution network automation.

了解详情

New Generation DDS606 E Series Single-Phase Electronic Power Meters

The new generation DDS606 E series single-phase electronic power meter is widely used to meter the electricity consumption of lighting and home appliances in residential buildings, institutions, and shops. With advanced ultra-low-power integrated circuit technology and SMT manufacturing process, this meter is used to meter AC single-phase active energy with a rated voltage of 220V and a rated frequency of 50Hz.

了解详情

CDS2v Electromagnetic Starter

CDS2v is a series of Dengfeng products, and mainly used to control AC 50HZ (or 60HZ), control the direct start and stop of three-phase cage induction motor, and can provide the overload protection for motor.

了解详情

CDC19v Capacitor Changeover Contactor

Dengfeng series CDC19v switching capacitive contactor is a new switching capacitive contactor after the Navigator CDC19s. With perfect industrial classic appearance, more complete product specifications, higher electrical life, and a number of humanized design, it can create a convenient and secure perfect use experience for customers.

了解详情

JZC4v Contactor Relay

JZC4v is a series of Dengfeng products with convenient operation and leading quality in China are manufactured with a new generation of technology platform by using the automation product and testing equipment and focusing on the actual application needs of customers.

了解详情

JR2v Thermal Overload Relay

JR2v is a series of Dengfeng products with convenient operation and leading quality in China are manufactured with a new generation of technology platform by using the automation product and testing equipment and focusing on the actual application needs of customers.

了解详情

CJX2v AC Contactor

By inheriting the classic technology platform, it is upgraded again on the basic of the Navigator series through independent innovation, leading the upgrade and iteration of domestic contactor products again. Through better contact system, electromagnetic system design, integrated 11 auxiliary contact, and further improvement of key processes and automated processes, the product consistency and stability are further improved providing higher cost performance, higher reliability, artistic appearance. Through mechanical and electrical distribution channels, services include OEM customers, PB, industrial clusters, and end users to meet their needs in various industries.

了解详情

DZ47vG Disconnector

了解详情

DZ47vY Surge Protective Device

了解详情

DZ47vGQF Automatic Recover Over/Under-Voltage Protector

Automatic recover over/under-voltage protector is a product for automatic control and protection of electrical equipment or household appliances when the power grid or power quality is unstable. It is mainly suitable for single-phase AC230V/or three-phase AC400V, 50Hz users or loads with a rated current 100A and below, such as user residential household line or single-phase electrical equipment and loads to be protected.

了解详情

DZ47vLE-125 High-Current Earth Residual Current Circuit Breaker

了解详情

DZ47vPLE Phase Line + Neutral Line Earth Residual Current Circuit Breaker

了解详情

DZ47vLE Miniature Earth Residual Current Circuit Breaker

了解详情

DZ47MA Single Magnetic Circuit Breaker

了解详情

DZ47vZ DC Miniature Circuit Breaker

了解详情

DZ47v-125 High-Current Circuit Breaker

了解详情

AFDD Arc Fault Protection Circuit Breaker

The most prominent function of the Dengfeng series AFDD arc fault protection circuit breaker is to detect the arc fault at the load end of the line and to disconnect the arc fault. It is recommended for occasions where people are dense and flammable materials are concentrated, such as: home decoration, schools, hotels, libraries, and museums.

了解详情

CDW3v Air Circuit Breaker

CDW3v series air circuit breaker has the most complete shell frame of the same series of products in the industry with 6 frames from 1600 to 6300AF to fully meet the requirements of customers for different current, breaking, size and wiring. The integration of international advanced technology platform products and domestic cost-effective platform products has been comprehensively upgraded, making customers experience high stability, ultra-high durability, strong protection, as well as exquisite size and super high cost performance.

了解详情

DZ47vP Phase Line + Neutral Line Circuit Breaker

了解详情

DZ47v Miniature Standard Circuit Breaker

DZ47v series terminal power distribution products is an innovatively designed and carefully built product through innovative technology platform according to the customer needs with smaller width, more convenient wiring, and more comprehensive protection. Widely used in many fields such as construction, electric power, mechanical support, industry, and new energy.

了解详情

CDM3vE Electronic Moulded Case Circuit Breaker

Dengfeng series electronic moulded case circuit breaker CDM3vE is a perfectly upgraded product. CDM3vE features with wide current coverage, strong breaking capacity, and remote four-remote communication to realize intelligent interconnection, and supports mobile APP communication and alarm non-trip function; the ultimate use temperature of the product can reach -40°C~70°C.

了解详情

CDM3vL Residual Current Operated Circuit Breaker

CDM3vL series residual current operated circuit breaker has its main function to provide indirect contact protection for personal electric shock that causes fatal danger, and to provide protection for electrical fire caused by ground fault current, such as insulation damage. It can provide the protection of circuits and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line, and is widely used in low-voltage power places such as electric power, construction, industry, and OEM.

了解详情

CDM3v Moulded Case Circuit Breaker

CDM3v moulded case circuit breaker is a mechanical switch used in the low-voltage distribution line can power on, carry and power off the current under normal circuit conditions, can also power on and carry the current for a certain time and power off the current for protection of lines and equipment in case of overload, short circuit, or undervoltage (accessory function) of the power distribution line. It is widely used in low-voltage power places such as electricity, construction, industry, and OEM.

了解详情

DZL18T Transparent Earth Residual Current Circuit Breaker

DZL18T transparent residual current circuit breaker is suitable for AC 50Hz circuits with a rated working voltage 220V, and a rated current of 32A or 20A. It is mainly used in temporary distribution boxes on construction sites.

了解详情

CDBULES Miniature Earth Residual Current Circuit Breaker

了解详情

CDMQ1 Water Pump Open-Phase Protector

CDMQ1 series water pump open-phase protector is suitable for AC 50Hz power supply with a rated voltage of 380V and a rated current up to 100A to provide open-phase protection for water pumps and other motors in irrigation scenarios.

了解详情

CDB9FS Auxiliary Alarm Integrated Type

CDB9FS auxiliary alarm integrated accessory is mainly assembled with CDB9 series circuit breakers to realize remote indication of the fault status and on-off status of the circuit breaker, and an alarm can be issued.

了解详情

CDB9FF Accessories

CDB9FF double auxiliary accessories are mainly assembled with CDB9 series circuit breakers to realize the remote dual indications of fault state and on-off state of the circuit breaker.

了解详情

CDH8 Series DC Disconnector

CDH8 series DC disconnector with a rated insulation voltage 1000V, a rated frequency 50Hz, a rated working voltage up to DC250V/500V, AC400/690V, and rated working current up to 630A is mainly used in the power distribution circuit for power isolation and power conversion isolation. The switch can be operated manually, and the structure adopts single-pole module splicing mode, and the number of poles and the position of the operating mechanism can be freely combined to better meet customer needs. The moving contact structure is of the rotary type and equipped with a metal arc extinguishing grid to reliably extinguish the arc for safe operation.

了解详情

AVR-P Series Portable AC Regulator

AVR-P series portable AC regulator mainly uses multi-socket output and relay AC voltage regulation method, featuring with fast response, no distortion, small size, light weight, and small power consumption; with voltage stabilization, mains output socket options (with USB output port for 2kVA and above products), all sockets have plug and play features, suitable for areas with large voltage fluctuations, and it is a voltage stabilization and protection equipment for household appliances such as air conditioner, refrigerator, and TV.

了解详情

AVR-W Series Wide Range Automatic AC Regulator

AVR-W series wide range automatic AC regulator is an automatic AC regulator with wide range. The product features with fast response, no waveform distortion, small size, light weight, small power consumption, and multi-function color screen display, and has overvoltage, undervoltage, overload, and temperature protection functions, It is suitable for areas with large voltage fluctuations, and is a voltage stabilization and protection equipment for household appliances such as air conditioners, refrigerators, TVs, and audios. When the output voltage is unstable caused by grid voltage fluctuations or load changes, the control circuit will automatically drive the corresponding relay according to the output voltage change to adjust the self-coupling voltage regulator coil taps (and turns ratio) to realize the automatic and stable output voltage. With small no-load damage and high efficiency, the product can supply a reliable and stable power for electrical equipment for a long time.

了解详情

CDSDVC Series Pressure Regulation Vibration Feed Controller

CDSDVC series pressure regulating vibration feeding controller is a control management equipment developed and designed for speed control and fault protection of vibration feeding tray of the automation equipment. The product features with simple operation and convenient use. This product has full-wave/half-wave, slow start, wire-controlled speed regulation, 4-20mA speed regulation, preset two-stage fast speed output, material full shutdown, material empty shutdown, overload protection, and overtemperature protection (note that the functions of the product are determined depending on the product model).

了解详情

CDKH-S High Power Switching Power Supply

CDKH-S series products are single-group output high-power switching power supplies with metal shell appearance design and 200-240VAC input voltage, and they can provide 12V 24V 36V 48V output (special requirements can be customized). This series of products has an efficiency up to 87%, with metal shell design to provide good heat dissipation performance, making the product can work in the temperature range of -20℃ to +70℃; the whole series of products has ultra-low no-load and no-consumption, making the terminal system meet the international energy requirements. CDKH-S series products provide a cost-effective solution for various industrial applications, and products are used in industrial control or automation devices, testing and measurement instruments, laser-related machines, and aging equipment.

了解详情

CDKN-S Narrow-Face Rail Switching Power Supply

CDKN-S series products are single-output narrow-sided rail switching power supplies with narrow-sided metal shell appearance design, and it adopts 100-240VAC input voltage, and provides 12V 24V 36V 48V outputs (special requirements can be customized). This series of products has an efficiency up to 88%, with narrow-faced metal shell design to provide good heat dissipation performance, making the product can work in the temperature range of -20℃ to +70℃; the whole series of products has ultra-low no-load and no-consumption, making the terminal system meet the international energy requirements. CDKN-S series products provide a cost-effective solution for various industrial applications; products are used in industrial control systems, industrial automation machinery, mechanical and electrical equipment, and electronic instruments.

了解详情

CDPC Water Pump Intelligent Controller

CDPC pump intelligent controller adopts integrated control with simple installation, full functions, and higher end to realize the functions such as manual/automatic start/stop and overload protection of two pumps, automatic switching of two pumps, automatic fault switching, automatic stop of pump in case of fault. Among them, CDPC-1K2BA also has the functions of manual/automatic BA interface signal output and overload BA interface signal output; CDPC-1K2QB has overheating protection and water leakage protection.

了解详情

LKSF Sine Wave Filter Reactor

Driven by a PWM inverter, a sine wave filter can still provide a smooth sine wave at the low residual ripple voltage in the switching frequency range between 2-8kHz. In inverter drive applications, it can prevent damage to the winding insulation of the motor, reduce the resonance generated by the distributed capacitance and distributed inductance due to cable length, eliminate motor overvoltage caused by high dv/dt, eliminate the early damage to the motor caused by eddy current loss, improve the performance and life of the motor, and extend the output distance of the inverter.

了解详情

CDGB Isolating Transformer

The output end of the isolation transformer is completely "open" isolated from the input end. By isolating the primary power circuit, the secondary circuit floats to the ground, and the zero line is shorted to the ground on the secondary side of the transformer to reduce the output zero ground voltage to 1V and below for protection, lightning protection, filtering, and signal interference elimination. Widely used in places where zero ground voltage, isolation and filtering are required such as UPS power supply, audio, projector, medical equipment, assembly line, shielded room, laboratory, and electrical maintenance.

了解详情

CDDI DC Signal Isolator

The main function of the DC signal isolator is to carry the isolation and anti-interference suppression treatment for the DC signal generated by the signal source, and then output the Source 1 or Source 2 independent loop DC signals for the control system or other unit combination instruments to realize the mutual isolation between input, output and power supply and to overcome inverter noise and various high and low frequency pulsation interference. It can be used with various instruments and DCS, and PLC, and is widely used in major projects in petroleum, petrochemical, manufacturing, electric power, and metallurgy industries.

了解详情

CDBS-C Single-Phase AC Current Transmitter

CDBS-C single-phase AC current transmitter directly converts the AC current of the main circuit under test into a constant current loop standard signal (4~20mA, 0~20mA, 0~5V, 0~10V) output in linear proportion, and continuously transmits it to the receiving device, PLC, DCS, and display instrument. CDBS-C is an extension of the company's existing CDBS current and voltage transmitters.

了解详情

Soldering Iron

It is the necessary tools for electronic production and electrical maintenance, and its main purpose is welding components and wires. It can be divided into internal heat type electric soldering iron and external heat type electric soldering iron and adjustable-temperature type electric soldering iron according to the mechanical structure. Delixi electric soldering iron series has the characteristics of fast heating, good hand feeling, fast heat transfer, light weight and small size, and high work efficiency.

了解详情

New Generation DTSY606/DSSY606 Series Three-Phase Prepaid Power Meter

了解详情

New Generation DDSY606 Series Single-Phase Prepaid Power Meters

了解详情

CDPV2-32(L) Fuse Product For Solar Photovoltaic System Protection

CDPV2-32(L) type solar photovoltaic system protection fuse is suitable for power distribution lines with a rated voltage not exceeding DC1500V, a rated current not exceeding 32A, and a rated short-circuit capacity not exceeding 33kA for short-circuit and overload protection It is mainly used in solar photovoltaic combiner boxes for short circuit and overload protection for solar photovoltaic power generation devices and other semiconductor equipment.

了解详情

DZ20Lw Residual Current Operated Circuit Breaker

DZ20Lw residual current operated circuit breaker is primarily suitable for AC 50Hz power distribution network with rated voltage of 400V and a rated current up to 630A for electric leakage protection; It can also be used to prevent fire hazards caused by ground fault current due to equipment insulation damage, and it is also for distribution of electrical energy h and for protection of lines and power equipment against overload and short circuit, and for infrequent switching of lines.

了解详情

DZ20w Moulded Case Circuit Breaker

DZ20w moulded case circuit breaker is suitable for AC 50Hz circuits with a rated insulation voltage 400V, a rated working voltage 380V and below, and rated current 16A to 630A. This series of circuit breakers is used in power distribution networks for electric energy distribution and for overload and short-circuit protection of lines and electrical equipment. Under normal circumstances, the circuit breaker can also be used for infrequent line switching and infrequent motor starts. It is widely used in temporary electricity places such as construction sites. Comply with standards: GB/T 14048.2, IEC 60947-2.

了解详情

CDJ1-K3 Series Built-In Bypass Soft Starter

Delixi built-in bypass soft starter CDJ1-K3 series is a motor control equipment integrating soft start, soft stop and multi-function protection to realize shock-free and smooth startup of motor throughout the entire starting process. CDJ1-K3 series has built-in bypass contactor and control power; the input of soft starter is only connected to the circuit breaker, and the motor is directly connected to the output of soft starter for power-on.

了解详情

CDZFK Remote Control Forward And Reverse Control Box

CDZFK series remote control forward and reverse control box is mainly used to turn on or off various forward and reverse equipment power supply, suitable for applications that the motor forward and reverse rotation is required such as greenhouse roller shutter machine, feeder, mobile lift, and lifting equipment.

了解详情

CDYNSCB Special Protection Device For Surge Protective Device

CDYNSCB series surge protector special protection device is connected in SPD loop in series to realize the function of quickly cutting off power frequency small current and high current lightning strike without trip using internal current sorting channel device. Compared with conventional backup protection devices, it has advantages of higher breaking capacity and better surge shock tolerance, and of realizing quick-cut of low short-circuit current.

了解详情

宝武集团

了解详情

“业精于勤扩达共赢” 全国业扩客户活动

了解详情

CJX2H AC Contactor

The new CJX2H AC contactor product is a upgraded product based on the original Navigator series CJX2s products. The materials of its electromagnetic system, contact system, and contact supports have been widely improved, enhancing the electrical life performance of the product. The product is more suitable for frequent on-off, AC-4 forward and reverse rotation, jogging, blocking rotation, and low voltage start and stop, and can meet a variety of harsh working conditions.

了解详情

It was awarded as "Top 10 Competitive Real Estate Suppliers in China" in the category of low-voltage components and switch panels

了解详情

DZ47L1E Electronic Leakage Protection Switch

DZ47L1E electronic leakage protection switch is suitable for AC 50Hz line with a rated voltage two-pole 230V, four-pole 400V, an a rated current up to 63A; when the personal electric shock occurs or the grid leakage current exceeds the specified value, the earth residual current circuit breaker can quickly cut off the fault current in a very short time to protect the safety of people and electrical equipment. The product is suitable for occasions with leakage protection required such as residence (mainly for low-cost housing.

了解详情

New Generation DTS606/DSS606 Series Three-Phase Electronic Power Meter

DT(S) S606 three-phase electronic power meter is an active power meter designed and developed to adapt to the transformation of the power grid. It features with high accuracy and reliability. It is mainly used in three-phase power grids with a reference frequency of 50Hz, which is the most ideal choice for enterprises, substations or power plants that active energy evaluation is required, and it is also suitable for transmission and distribution or distribution network automation.

了解详情

New Generation DDS606 Series Single-Phase Electronic Power Meter

DDS606 single-phase electronic power meter is widely used to meter the electricity of lighting and home appliances in residential buildings, institutions, and shops. With advanced ultra-low-power integrated circuit technology and SMT manufacturing process, this meter is used to meter AC single-phase active energy with a rated voltage of 220V and a rated frequency of 50Hz.

了解详情

LAY5s-16 Button Indicator

With complete specifications, LAY5s-16mm button indicator can meet the needs of various numerical control, program control, and electronic and electrical controls, and widely used in AC/DC220V and below machine tools, textile, tobacco, telecommunications, ships, aviation, automobiles, medical equipment, and instrumentation fields as circuit control and signal indication.

了解详情

CDEV1 CDEV2 New Energy Contactor

CDEV1/2 series ceramic encapsulated new energy contactors are mainly used in new energy vehicles, hybrid vehicles, renewable energy storage, battery charging systems, fuel cell & solar systems, new energy related infrastructure, high-power DC equipment, and general industrial equipment.

了解详情

CDXY-16 Portable Car Charger

CDXY-16 portable car charger is of the AC cable single gun charging type, and the product is composed of an embedded single-chip microcomputer control, a LCD liquid crystal display, a LED status indicator, and universal charging interface, integrating with display, metering, and protection; it can provide a portable, reliable AC charging power supply for new energy electric vehicles.

了解详情

CDK New Socket Series

Fashion: White classic design, high-end and elegant High quality: 10A silver contact alloy switch to eliminate arc flash, H62 high precision copper patent plug bush, good conduction and resistant to plug and unplug, with power cord thickened by 33%. Intelligent: Intelligent current shunt, triple USB intelligent charging, intelligent identification, and matching of the current required by connected devices Safety: New national standard plug-in, and anti-shock protection door design to effectively prevent the risk of electric shock Flame retardant: High-strength PC flame retardant material, with high temperature resistance and anti-aging

了解详情

CDC6F High Current Contactor

CDC6F series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz or 60H circuits with a rated operating voltage up to 1000V and a rated operating current up to 2100A for remote connection and disconnection of circuits; it can for an electromagnetic starter together with an appropriate thermal overload relay protect circuits that may be overloaded.

了解详情

CDM6EY Electronic Moulded Case Circuit Breaker

CDM6EY electronic moulded case circuit breaker is suitable for AC 50Hz circuit with a rated voltage AC400V and a rated current up to 800A with long delay, short delay, instantaneous, over/under-voltage, open phase, and pre-alarm functions.

了解详情

CJX2M Miniature AC Contactor

CJX2M series miniature AC contactor coil current specifications include 06, 09, 12A AC and 06, 09, 12A DC specifications for remote connection and disconnection circuit; products are widely used in electric hoists, small machine tools, elevators, conveyors, automatic roller shutter doors, and fire doors industries.

了解详情

CDKL-S Light Box Series Switching Power Supply

CDKL-S series products are single-output lightbox type switching power supply adopts ultra-thin aluminum alloy shell design with 180-240VAC input voltage. The whole series provides 12V 24V output (special requirements can be customized). This series of products has the efficiency up to 86%, with ultra-thin aluminum alloy shell design to ensure good heat dissipation performance, so that the product can work in the temperature range of -10℃ to +60℃; the whole series of products has ultra-low no-load and no-consumption, making the terminal system meet the international energy requirements. CDKL-S series products provide a cost-effective solution for various industrial applications, and it is mainly used in industrial automation, Kabu light box, LED light box, electronic information, and security monitoring.

了解详情

CDKD-S Color Screen Type Switching Power Supply

CDKD-S color screen switching power supply is suitable for many fields such as color screen, display, LED billboard, light box, and city lighting, and can provide stable and reliable DC power supply.

了解详情

CDLJ Series Proximity Switches

CDLJ series proximity switch is a position sensor with switching output. It not only has the characteristics of travel switch and micro switch, but also has sensing performance. It can directly drive relays, counters and contactors, and can also be connected to microcomputer networking to realize automatic control. The product is widely used in machine tools, metallurgy, chemical industry, textile and printing industries, and used in the automatic control system as limit, counting, positioning control and automatic protection links.

了解详情

CDQ6s Series Dual Power Automatic Transfer Switch

了解详情

CDM3E Electronic Moulded Case Circuit Breaker

The Navigator series electronic moulded case circuit breaker CDM3E was launched in 2020 with a perfect upgrade of the product realized. CDM3E current has a wide coverage from 32A~1600A; with remote four-remote communication to realize intelligent interconnection; support mobile APP communication and alarm non-trip function; The ultimate use temperature of the product can reach -40°C~70°C.

了解详情

CDZC-10□-Y (LCD Type) Intelligent Charging Station

CDZC-10□-Y intelligent charging station is a charge-type charging management equipment designed and developed by Delixi Electric Co., Ltd. for safe charging of electric bicycles and for convenient property management. This product adopts LCD screen for visual display, and it is the preferred equipment for electric bicycle charging management in many places such as residential community, public parking lots, large shopping malls, and units. This series of products has four consumption modes: traditional direct charge, pay-by-card, coin (one coin), and QR code payment to remote modification of payment parameters, remote query of consumption revenue records, and remote renewal.

了解详情

CDZC-2W Series Intelligent Charging Station

CDZC-2W series smart charging station is a new type of Source 2 charging station launched by the company, and there are two operation modes: independent type and split type. The independent type charging station has its own communication module, suitable for decentralized installation sites; the split type is composed of a communication concentrator and multiple Source 2 intelligent charging sockets; one communication concentrator can control up to 50 (100-way) Source 2 charging stations, generally covering the underground parking lot of the community; The maximum output power of each channel of this product is 1100W, each channel is independently metered; the product supports overload protection, short circuit protection, surge protection, and high temperature protection, while supporting intelligent background monitoring and remote upgrade for s convenient maintenance and flexible operation.

了解详情

The JRS3D Thermal Overload Relay

了解详情

CDC3D High Current Contactor

CDC3D series high current contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz or 60Hz circuits with a rated operating voltage up to 690V and a rated operating current to 630A for remote connection and disconnection of circuits; it can form an electromagnetic starter together with an appropriate thermal overload relay to protect circuit that may be overloaded.

了解详情

AFDD Arc Fault Protection Circuit Breaker

The most prominent function of AFDD is detecting arc faults at the load side of the line and disconnecting arc faults. It is recommended for occasions where people are dense and flammable materials are concentrated, such as: home decoration, schools, hotels, libraries, and museums.

了解详情

ST Series Terminal Blocks

ST pull-back spring terminal block adopts a general spring wiring technology. With high compression force, excellent shock resistance and air tightness, this product can ensure the long-term stability of the wire connection. The compact top inlet provides more easy operation. The spring can be opened with a standard flathead screwdriver. Insert the wire into the terminal connector and remove the screwdriver, so the wiring connection is completed. The pull-back spring terminal has a large wiring capacity, the wire with a rated wire diameter can also be directly connected or connected via a cold press head. The insulation material adopts flame retardant nylon with good insulation and aging resistance; the rated operating voltage is 800V. The rated cross-sectional area of the connecting wire is 0.5 mm2 ~ 16 mm2.

了解详情

BKMJS Dry-Type Self-Healing Low-Voltage Shunt Capacitors

了解详情

CDKP-S Rainproof Switching Power Supply

CDKP-S series products are single-output semi-glued enclosed switching power supplies with semi-glued splash-proof appearance design, and have 220VAC input voltage (customized for 110VAC input voltage). The whole series provides 5V 12V 24V 36V 48V outputs (those with special requirements can be customized). CDKP-S series products provide a cost-effective solution for various industrial applications, and they are mainly used in industrial automation, electronic information, security monitoring, city lighting, LED street lights, displays, billboards, and light boxes.

了解详情

LMK6-0.66 Series Open-Close Type Current Transformer

LMK6-0.66 series current transformer is mainly suitable for AC circuits with a rated voltage of 0.66kV and below and rated frequency of 50Hz for current and electric energy measurement or relay protection. By fully considering the customer needs, this product is innovatively developed with the opening and closing installation methods, saving a lot of installation and maintenance time for users. LMK6-0.66 series open-close current transformer is still wound by pure copper enameled wire; wiring screws and gaskets are made of copper, and copper's various indicators such as conductivity, tensile strength, and electrical loss rate are superior to aluminum.

了解详情

LMK5-0.66 Series Current Transformer

LMK5-0.66 150/5 to LMK5-0.66 5000/5 series current transformers are mainly suitable for AC circuits installed indoors with a rated voltage 0.66kV and below and a rated frequency of 50Hz AC for current, electric energy measurement or relay protection. This series of product is increased in height, with a busbar mounting bracket added, and the accessory mounting positions are designed at four corners to bring a better experience for users.

了解详情

CDKS-S Miniature Rail Type Switching Power Supply

CDKS-S series products are single-output rail-mounted switching power supplies with ultra-thin plastic shell design and has a universal input voltage 100-240VAC. With DC OK signal output, the entire series provides 5V 12V 15V 24V 36V 48V outputs (those with special requirements can be customized). CDKS-S series products provide a cost-effective solution for various industrial applications, and are mainly used in industrial automation, electronic information, and security monitoring fields

了解详情

DDSU6606 Single-Phase Electronic Power Meter (2P Rail)

DDSU6606 single-phase electronic power meter (2P, rail) is used to measure 50Hz single-phase AC active energy with a voltage of 220V, and the current specification covers 5(60)A thanks to its higher accuracy, reliability and stability; With standard 35mm rail mounting method used, it works with miniature circuit breakers to realize terminal power distribution energy measurement.

了解详情

CDZCFK10T Series Adjustable Dedicated Card Sender

There are optional computer and handheld types for special card sender for CDZC-10□-T adjustable smart charging station, with stable quality and convenient operation.

了解详情

AC Angle Grinder

Angle grinder is mainly suitable for grinding and cutting of various metal materials.

了解详情

AC Electric Hammer

It is mainly suitable for drilling holes on building material cement and bricks, and for destroying reinforced cement.

了解详情

AC Multifunctional Impact Drill

Multifunctional AC impact electric drills are suitable for drilling or reaming holes on iron plates, cement, brick walls, aluminum, and wood materials.

了解详情

AC Electric Hand Drill

Electric hand drills are mainly suitable for drilling holes on non-metallic (wood, aluminum) materials.

了解详情

AC Marble Machine

Suitable for: cutting various stones, concrete, and other non-metallic materials; dry cutting, and wet cutting with water.

了解详情

CDQ0s Series Dual Power Automatic Transfer Switching Equipment

CDQ0s series PC-level automatic transfer switching equipment is suitable for 50Hz three-phase four-wire power supply and distribution system with a rated working current up to 250A and for single-phase power supply and distribution system.

了解详情

CDZC-10□-T Adjustable Intelligent Charging Station

CDZC-10(SW)-T and CDZC-10(SW)-TC series adjustable intelligent charging station is a charge-type charging management equipment designed and developed by Delixi Electric Co., Ltd. for safe charging of electric bicycles and for convenient property management. This series of products has four consumption modes: traditional direct charge, pay-by-card, coin (one coin), and QR code payment. With remote background management functions added, it supports remote modification of payment parameters, remote query of consumption revenue records, and remote renewal; with simple operation and convenient use, this equipment is the preferred equipment for electric bicycle charging management in many places such as residential community, public parking lots, large shopping malls, and units.

了解详情

CDB9LE Miniature Earth Residual Current Circuit Breaker

CDB9LE, CDB9LEH is suitable for AC 50HZ low-voltage terminal power distribution system with a rated voltage 230/400V and a rated current 6-63A; With overload protection, short circuit protection, leakage protection, control, and disconnection functions.

了解详情

CDB9 Miniature Circuit Breaker

CDB9N, CDB9H miniature circuit breaker is suitable for AC 50HZ low voltage terminal power distribution system with a rated voltage 230V/400V and a rated current 1-63A. With short circuit protection, overload protection, and disconnection functions.

了解详情

DZ47MA Single Magnetic Circuit Breaker

DZ47MA series single magnetic moulded case circuit breaker is mainly used in AC 50Hz/60Hz circuits with a rated working voltage 230V (1P) 400V (2P-4P), and rated working current 6A~63A. This series of circuit breakers is equipped with a short-circuit protection release rather than overload protection release, especially suitable for occasions with high requirements for power supply continuity, such as building fire protection, and medical IT power distribution system.

了解详情

CDFL Series Electrical Fire Monitoring System

CDFL series electrical fire monitoring system is composed of a CDFL combined electrical fire detector, a CDFLS combined electrical fire detector, and a CDFL-Z electrical fire monitoring equipment (host) to receive residual current and temperature signals from field equipment to realize the alarm, monitoring, control and management of protected electrical lines. This system is suitable for intelligent buildings, high-rise apartments, hotels, restaurants, commercial buildings, industrial and mining enterprises, national key fire fighting units, petrochemical, cultural and educational health, finance, and telecommunications fields for remote metering, remote adjustment, remote control, and remote signaling of detectors scattered in the building to realize convenient monitoring and management.

了解详情

CDM9Ei Electronic Moulded Case Circuit Breaker

CDM9Ei electronic moulded case circuit breaker was grandly launched, new Era series with better quality. Furthermore, the "Dejia New Intelligence" APP has also been newly upgraded. You can scan the QR code on the product or manual to download.

了解详情

DZ47MLE Miniature Earth Residual Current Circuit Breaker

DZ47MLE is a "coal-to-electricity" dedicated miniature circuit breakers, suitable for AC 50HZ device with a rated voltage AC230/400V, and it has overload protection, short circuit protection and control isolation functions. It is not only suitable for conventional environments, but also suitable for special occasions such as motor starting, electric heating equipment, capacitor cabinets, high inductance and high capacitive loads, and high temperature environment, such as electric heating equipment including electric boilers and electric heaters.

了解详情

CDB9LM Electromagnetic Miniature Earth Residual Current Circuit Breaker

CDB9LM is an electromagnetic miniature earth residual current circuit breaker. Suitable for AC 50HZ low voltage terminal power distribution system with a rated voltage 230/400V AC; With overload protection, short circuit protection, electric leakage protection, control, and isolation functions. It is not only suitable for conventional environments, but also suitable for places with strong electromagnetic interference, such as elevators and construction sites, and its electric leakage protection function is independent of the power supply voltage without any misoperation occurred.

了解详情

DZ47M Miniature Standard Circuit Breaker

DZ47M is a "coal-to-electricity" dedicated miniature circuit breakers, suitable for AC 50HZ device with a rated voltage AC230/400V, and it has overload protection, short circuit protection and control isolation functions. It is not only suitable for conventional environments, but also suitable for special occasions such as motor starting, electric heating equipment, capacitor cabinets, high inductance and high capacitive loads, and high temperature environment, such as electric heating equipment including electric boilers and electric heaters.

了解详情

CDLE6i Residual Current Protection Circuit Breaker

CDLE6i series residual current protection circuit breaker has overload protection, short circuit protection, over/under voltage protection, open phase protection, phase sequence protection, zero line breaking protection, surge protection, automatic reclosing, and communication function, There are optional photovoltaic special module, lightning protection module, and infrared communication functions. It is mainly suitable for three-phase, four-wire neutral point direct ground (TT) systems on the load side of transformers.

了解详情

CDM3T Moulded Case Circuit Breaker

The new CDM3T series moulded case circuit breaker products are suitable for AC circuits with a rated working voltage AC400/415V and a rated current of 16-630A. With high-quality, transparent and visible products, provide stable electrical protection for temporary power consumption places in industry, commerce, civil buildings, and infrastructure. It is used for electric energy distribution and lines and power equipment protection to avoid damage caused by faults such as overload and short circuit.

了解详情

DTS606K Electronic Embedded Power Meter

DTS606K three-phase four-wire electronic embedded power meter (hereinafter referred to as " power meter") is an active power meter designed and developed to adapt to the transformation of the power grid, and it is installed in the distribution panel or distribution cabinet, with high accuracy and reliability. This power meter is a high-tech product manufactured with international advanced ultra-low power large-scale integrated circuit technology and SMT process to measure the three-phase AC active energy in the grid with a reference frequency of 50Hz, and can measure forward and reverse active energy, and the electricity is accumulated in one direction. It is characterized by high precision, good reliability, wide load, low power consumption, straight error curve, and strong anti-interference capacity. This power meter complies with the standard GB/T 17215.321-2008 "Electricity metering equipment (a.c.) - Particular requirements - Part 21.

了解详情

CDM3LT Residual Current Operated Circuit Breaker

The new CDM3LT series moulded case circuit breaker products are suitable for AC circuits with a rated working voltage AC400/415V and a rated current of 16-250A. With high-quality, transparent and visible products, stable electrical protection can be provided for temporary power consumption places in industry, commerce, civil buildings, and infrastructure for electric energy distribution and line and power equipment protection to prevent damage caused by overload, short circuit, or electric leakage faults.

了解详情

CDA9 Pushbutton Switch

There are complete specifications and various accessories for CDA9 pushbutton switches. The product complies with CCC/CE/ROHS IP65 high protection grade. A series that integrates perfect appearance and excellent performance – with three advantages of perfect industrial design, safety and reliability, and convenient operation, a special symbolic button can be customized for elevators.

了解详情

CDFD1 Fire Equipment Power Monitoring System

CDFD1 series fire equipment power monitoring system consists of CDFD series voltage/current sensor (hereinafter referred to as sensor) and CDFD-Z fire equipment power status monitor (hereinafter referred to as monitor). CDFD series voltage/current sensor is used for real-time detection of fire equipment power supply, and used to motor the working status of fire equipment power supply, and to detect any fault of fire equipment power supply such as interruption, overvoltage, undervoltage, overcurrent, phase loss, and short circuit in real time through data analysis. When a fault occurs, the location, type and time of the fault can be quickly displayed and recorded on the monitor, and an audible and visual alarm signal can be issued to effectively avoid the phenomenon that the fire cannot be effectively controlled and is spread due to the failure of the fire equipment in case of a fire.

了解详情

CDHK18 Series Disconnector

CDHK18 series disconnector is suitable for AC 50Hz circuits with a rated voltage of single-phase 220V, three-phase 415V or less, a rated current up to 63A circuit, a rated insulation voltage 800V, and a rated impulse withstand voltage 6kV for frequent manual connection, disconnection and isolation of circuits in the household appliances and industrial enterprise power distribution system.

了解详情

CDB6iGQF Automatic Recover Over/Under-Voltage Protector

Automatic recover over/under-voltage protector is a product for automatic control and protection of electrical equipment or household appliances when the power grid or power quality is unstable. It is mainly suitable for single-phase AC230V/or three-phase AC400V, 50Hz users or loads with a rated current 100A and below, such as user residential household line or single-phase electrical equipment and loads to be protected.

了解详情

CDDZ-S Series AC Power Transformer

CDDZ-S series AC power transformer is a household transformer newly launched by the company on the basis of CDDZ products with a variety of practical functions such as anti-tripping when startup, timing shutdown, lightning protection, surge protection and overheating, overcurrent and overvoltage, and undervoltage protection. It is suitable for 50Hz~60Hz AC circuits, and mainly used for power conversion of low-voltage household appliances imported from or exported to the United States and Japan, such as imported rice cookers, cooking machines, face steamers, hair dryers, coffee machines, and beauty equipment. The product performance indicator complies with GB/T 19212.1.

了解详情

RS38MG, RS51MG, RS63MG Car Charging Pile Fuse

RS38MG, RS51MG, RS63MG car charging pile fuse is suitable for electrical control devices with a rated voltage not exceeding 750V and a rated current of 800A such as car charging piles for short-circuit protection of semiconductor components and the complete sets of equipment composed of them.

了解详情

KG316TP-10U, KG316TP-10D, KG316TP-10S Time Control Socket

KG316TP-10U has USB interface and KG316TP-10D countdown function; KG316TP-10S has cycle timing function. Three types of time control sockets can automatically and periodically turn off/on the power supply and control the operation of the electrical equipment under the unattended conditions for energy saving, environmental protection, and extended service life of electrical appliances.

了解详情

JQX-15F Miniature Relay

JQX-15F relay is an electronic control device, and usually used in automatic control circuits; it is actually an "automatic switch" to control larger current and higher voltage with smaller current and lower voltage. Therefore, it can realize the automatic adjustment, safety protection, and circuit conversion in circuits, and is widely used in automatic control (such as household appliances, elevators, and control circuits in machine tools) and communication fields.

了解详情

Clamp Meter

With true RMS measurement, it can accurately measure various waveforms in real time; With AC dual-purpose, high current measurement, and complete function, it is suitable for various application scenarios; Two-color backlit display, orange backlit high-voltage warning, with clear letters; With flashlight lighting function, convenient operation in dark or dark places; Made of ABS material, anti-fall and wear-proof, sturdy and durable; NCV non-contact AC voltage detection, safer detection and more convenient operation; Streamlined design, more suitable hand feeling, easy and fast operation.

了解详情

15KV Cold Shrink Cable Accessories

Features: Fully cold shrinkable cable accessories have superior anti-contamination, aging resistance, and cold and heat resistance, especially suitable for high altitude areas and cold places, humid areas and heavily polluted areas. No open flame is required for installation, and it is especially suitable for flammable and explosive places such as petroleum, chemical, and mining.

了解详情

Multifunctional Power Outlet Tester

1. The LCD screen used to indicate ground error; 2. Quick identification of any dangerous voltage in the protected earth; 3. Three neon lamp indicators matching with the LCD screen can quickly indicate whether the socket is correctly wired; 4. Quick and effective RCD leakage protection switch testing; 5. RCD test time: 60~300ms 6. Contact voltage domain value: <35V AC voltage to ground, depending on the grounding conditions 7. RCD test current: 30mAΩ±15% 8. Working temperature: 0°C~40°C; relative humidity: <80%RH 9. Size\weight: 77×67×66mm/approx. 70g

了解详情

DJW-G, SJW-G Intelligent Contactless AC Regulator

This series intelligent contactless AC regulator has single-phase DJW-G and three-phase SJW-G modes to realize contactless control and perfectly combine with SCR switch technology; the product features with high voltage regulation accuracy, fast response speed, no mechanical wear, safety and efficiency. It is widely used in electrical places with stabilized voltage required such as industry, transportation, communications, national defense, railway, and scientific research.

了解详情

NCR Contactless AC Regulator

NCR-series is a contactless AC regulator integrating the advantages of many AC regulators. Through the combination of software and hardware control and multiple protection of main circuit, it is widely used in places with low voltage and frequent fluctuations to provide stable voltage for household appliances, computer data centers, communications, radio and television.

了解详情

RT16-00B (NT00B) Knife Contact Fuse Base

The product is suitable for AC 50Hz RT16-00 (NT00) or RT16-000 (NT00C) fuse with a rated voltage 690V and below and a rated current 160A and below, and mainly used in the distribution equipment of industrial electrical installations for line overload and short circuit protection.

了解详情

CDNTJ Series 10KV Integrated Pole-Mounted Substation Low-Voltage Fuse

CDNTJ series 10kV integrated pole-mounted substation low-voltage fuse is suitable for 50Hz low-voltage distribution cabinets and fuse-type disconnectors with a rated voltage up to 400V and a rated current up to 630A in line with the Typical Design and Testing Specifications for 10kV Integrated Pole-Mounted Substation and Power Distribution Primary and Second Complete Sets of Equipment. This product is a fuse with a full range of breaking capacity, and used in the integrated distribution boxes (also known as JP cabinets) to protect three-phase distribution transformer power lines for line overload and short circuit protection.

了解详情

CDM6SPV Moulded Case Circuit Breaker

CDM6SPV photovoltaic special series moulded case circuit breaker is suitable for AC circuit with a rated working voltage AC480V, AC500V, AC690V, and a rated current 63A ~ 630A AC circuit, and can be widely used in photovoltaic power generation and combiner box for electric energy distribution and for the protection of lines and power equipment to prevent fault hazards such as overload and short circuit.

了解详情

DTSU6606-1 Three-Phase Four-Wire Electronic Power Meter (Rail)

The design and structure of DTSU6606-1single-phase electronic (prepaid) power meter (rail) can ensure no any risk during operation under rated conditions. Small size, light weight, modular structure, and standard 35mm rail mounting method used can make it work easily with miniature circuit breakers. There is a magnetic holding relay on the internal circuit board for direct power on-off control; it can accurately measure the active energy with wide range, strong overload capacity, high accuracy and good working reliability. Purchase electricity first before electricity consumption. If the pre-purchased electricity is lower than the set value, an alarm will be issued, and the power supply will be cut off if the electricity is consumed.

了解详情

CDM6SEV Moulded Case Circuit Breaker

CDM6SEV moulded case circuit breaker is a special electrical component product in the charging pile industry launched by Delixi Electric, featuring with high temperature resistant, stable and reliable operation, and economical model.

了解详情

CDM6LEV Residual Current Operated Circuit Breaker

CDM6LEV moulded case circuit breaker is a special electrical component product in the charging pile industry launched by Delixi Electric, featuring with high temperature resistant, stable and reliable operation, and economical model. With the entire series of A-type electric leakage, the leakage action is more accurate to protect personal safety; the leakage current and time are adjustable, making maintenance more convenient.

了解详情

DZ47PLEY-63 Earth Residual Current Circuit Breaker

DZ47PLEY-63 series earth residual current circuit breaker (RCBO) has overload, short circuit, leakage protection and isolation functions. The product features with small size and compact structure. When there is electric shock or the leakage current of the power grid exceeds the specified value, the series of products can quickly cut off the fault current in a very short time to protect the safety of people and electrical equipment. This series is suitable for infrequent power-on/off of electrical devices and lighting lines, especially for industrial and commercial lighting distribution systems.

了解详情

CDJMB Series Hand Lamp Lighting Transformer

CDJMB series hand lamp lighting transformer is the latest ring structure hand lamp lighting transformer launched by the company, and has the advantages of small operating no-load current, small no-load loss, reliable operation and wide applicability, suitable for 50Hz~60Hz AC circuit as a low-voltage lighting safety power supply with a protective shell. It is widely used in the electronic industry, industrial and mining enterprises, machine tools, mechanical equipment circuit control and construction site tunnel as power supply of safety lighting and indicator. The product performance indicator complies with JB/T 5555.

了解详情

DC Fans

Installed in automatic control equipment and electronic equipment as a cooling and heat dissipation device Equipped with roller and ball bearings, with high precision and low noise The fan has high manufacturing quality and long service life and can work continuously for a long time

了解详情

CDSVG Stationary Reactive Power Generator

Different from the traditional reactive power compensation (capacitor + reactor), CDSVG static reactive VAR generator can monitor dynamic reactive power in real time, and calculate and emit the opposite reactive current for accurate and fast compensation; the remaining capacity can be used for harmonic compensation and imbalance compensation. The product performance indicators conform to DL/T 1216.

了解详情

CDAPF Active Power Filter

CDAPF active power filter can filter out various harmonics (2-50 times) existing in the power grid preferentially, and the remaining capacity can realize fast reactive power compensation and three-phase imbalance adjustment. The product performance indicators conform to JB/T 11067.

了解详情

CDSPC Three-Phase Unbalance Regulating Device

CDSPC three-phase unbalance adjustment device is mainly suitable for compensating unbalanced loads, and can also realize fast reactive power compensation, reduce voltage fluctuations, suppress various harmonics, and improve the quality of the power grid. The product performance indicators conform to DL/T 1216, JB/T 11067.

了解详情

JKF6C Intelligent Reactive Power Automatic Compensation Controller

JKF6C intelligent reactive power automatic compensation controller is our company’s new generation LCD controller, with fool-style wiring and various outputs characteristics. The product performance indicator complies with JB/T 9663.

了解详情

JKF2C Intelligent Reactive Power Automatic Compensation Controller

JKF2C intelligent reactive power automatic compensation controller is our company’s new generation LCD controller, with fool-style wiring and various outputs characteristics. The product performance indicator complies with JB/T 9663.

了解详情

JKF5C Intelligent Reactive Power Automatic Compensation Controller

JKF5C intelligent reactive power automatic compensation controller is our company’s new generation LCD controller, with fool-style wiring and various outputs characteristics. The product performance indicator complies with JB/T 9663.

了解详情

CKDG Series Single-Phase Series Reactor

CKDG series single-phase series reactor is used in low-voltage reactive power compensation cabinet, and works in the single-phase split compensation switching operation mode. It is connected in series with a capacitor to limit the capacitor closing inrush current and to limit the external inrush current generated when a fault occurred nearby or when the adjacent capacitor is switched or to eliminate response in the power supply container to avoid the reactor from resonance with the power system. Suppress high-order harmonics and improve system power factor to prevent irreversible damage caused by capacitor accidents. Suppress high-order harmonics and improve system power factor to prevent irreversible damage caused by capacitor accidents.

了解详情

CDSK Intelligent Composite Switch

CDSK intelligent composite switch is a special device for capacitor switching (with high anti-interference capacity) in our company's new generation low-voltage reactive power compensation device, with extremely high cost-effective performance. The product performance indicator complies with GB/T 29312.

了解详情

CDFX Fire Pump Automatic Inspection Control Equipment (Fire Inspection Cabinet)

CDFX series fire pump automatic inspection control equipment (fire inspection cabinet) is suitable for high-rise buildings, hotels, commercial buildings, various civil buildings, subways, railway stations, industrial and mining enterprises and other important departments to meet the fire protection requirements. It can be used as water supply facilities for sprinkler system and fire hydrant system, and can also be widely used in domestic water supply system.

了解详情

Card Sender, IC Card

The CDZC series smart charging stations with pay-by-card function can be used together with a card sender and IC card.

了解详情

CDZC-10□-G Series Source 10 Improved Intelligent Charging Station

CDZC-10□-G series intelligent charging station is a charging management equipment designed by Delixi Electric Co., Ltd. for safe charging of electric bicycles, electric vehicles and similar vehicles and for convenient property management. With simple operation and convenient use, this equipment is the preferred equipment for many places such as residential community, public parking lots, large shopping malls, and units. This series of products has four consumption modes: direct charge, coin (one coin), pay-by-card (contactless IC card), and QR code payment. When the pay-by-card to pay for charging, it must be used together with recharge card sender and contactless IC cards. Through the functions of one machine used for multiple controls, automatic power off, power off memory, full charge protection, electronic counting, intelligent CUP coin recognition, overload protection functions, it can be connected to the charging equipment to realize safe charging and charging time management.

了解详情

CDZC-□T(W) Series Source 4, Source 6, Source 10 Intelligent Charging Station

CDZC series intelligent charging station is a charging management equipment designed by Delixi Electric Co., Ltd. for safe charging of electric bicycles, electric vehicles and similar vehicles and for convenient property management. With simple operation and convenient use, this equipment is the preferred equipment for many places such as residential community, public parking lots, large shopping malls, and units. This series of products has three consumption modes: direct charge, coin (one coin) and QR code payment. Through the functions of one machine used for multiple controls, automatic power off, power off memory, full charge protection, electronic counting, intelligent CUP coin recognition, overload protection functions, it can be connected to the charging equipment to realize safe charging and charging time management.

了解详情

CDZC-1S/2S Series Source 1 And Source 2 Intelligent Charging Stations

CDZC-1S/CDZC-2S series Source 1 and Source 2 intelligent charging station is a charge-type charging management equipment designed and developed by Delixi Electric Co., Ltd. for safe charging of electric bicycles and similar vehicles and for convenient property management. With simple operation and convenient use, this equipment is the preferred equipment in many places such as residential community, public parking lots, and units. This series of product adopts a swipe-card charging model, and is matched with the recharge card sender and contactless IC cards. Through the functions of one machine used for multiple controls, automatic power off, power off memory, full charge protection, and electronic counting functions, it can be connected to the charging equipment to realize safe charging and charging time management.

了解详情

搜索您想知道的德力西电气

新产品中心

DZ47sLES Miniature Earth Residual Current Circuit Breaker

DZ47sY Surge Protective Device

CDPZ30v Lighting Distribution Box

CDM3S Moulded Case Circuit Breaker

CDM3LS Residual Current Operated Circuit Breaker

DZ47SCB Special Protection Device For Surge Protective Device

CDEN1 Lighting Distribution Box

CDEN1X Fiber Box

CDC19s Capacitor Changeover Contactor

CDM9i Moulded Case Circuit Breaker

DZ20Lw Residual Current Operated Circuit Breaker

DZ20w Moulded Case Circuit Breaker

AFDD Arc Fault Protection Circuit Breaker

CDEN1 Lighting Distribution Box

CJX2sF Large AC Contactor (CJX2sF-4P Added)

DZ15w Moulded Case Circuit Breaker

DZ15LEw Residual Current Operated Circuit Breaker

JDT50 Combined Tower Light

JDS100 Monochrome Warning Light

DZ47TRLE Transparent Miniature Earth Residual Current Circuit Breaker

DZ47TR Transparent Miniature Circuit Breaker

CDF1 Load Disconnector

CDM3T Moulded Case Circuit Breaker

CDM3LT Residual Current Operated Circuit Breaker

DDZY607 Single-Phase Remote Fee-Controlled Smart Power Meter

DZ47sGQF Automatic Recover Over/Under-Voltage Protector

CDKU-S Series Ultra-Thin Switching Power Supply

CDV2s Motor Circuit Breaker

P*606L Digital-Display Electrical Measuring Instrument

DZ47PLEY-63 Earth Residual Current Circuit Breaker

CDCE9 Series Low Voltage Smart Capacitor Compensation Device (Smart Capacitor)

CDBH Miniature Circuit Breaker

CDM6Ei Electronic Moulded Case Circuit Breaker

CDM6Z DC Moulded Case Circuit Breaker

CJX2s AC Contactor

JRS1Dsp Thermal Overload Relay

CDQ3H Series (Moulded Case Type) Dual Power Automatic Transfer Switching Equipment

CDC6i AC Contactor

CDR6i Thermal Overload Relay

CDB6LEi-125 High-Current Earth Residual Current Circuit Breaker

CDB6LEi Miniature Residual Current Operated Circuit Breaker

DZ47PLES-40 "Phase Line + Neutral Line" Earth Residual Current Circuit Breaker

DZ47L Leakage Protection Switch

CDS2s Electromagnetic Starter

CJX2-Z DC Operated AC Contactor

CDJD6 Residual Current Operated Relay

F4 Series Auxiliary Contacts

FD6 Series Auxiliary Contacts

CRT16-00 DC Fuse

CDDB Rail Type Transformer

CDK 122 Extension Cord Socket (New GB)

NBZ-Series Pure Sine Wave Inverter

NBC Series On-Board Inverter

HD18 Photovoltaic Special Disconnector

CDLD6H Indicator

LD11s Indicator

CDBA(Z)-63B Special Application IOT Circuit Breaker

CDQB Wall Heating Power Control Box

CDJL Series Machine Tool AC Reactor

CDB6PLEiN

CDB6PiN

P*606E Digital-Display Electrical Measuring Instrument

CDB6HLES-63

CDB6H-80 Miniature Circuit Breaker

CDB6HTC-63

CDB6H-63 Miniature Circuit Breaker

CDM3G Disconnector

CDMA-250G

CDH7-16~100 Series Disconnector

New GeneratioN DDSU6606V Series Single-Phase Electronic Power Meter (2P Rail)

CDMNEZ DC Moulded Case Circuit Breaker

MX+OFWY9 Passive Shunt + Auxiliary

MVMN9 Over/Under-Voltage Protection Accessories

MV9 Overvoltage Protection Accessories

MSN9 No-Voltage Protection Accessories

MN9 Undervoltage Protection Accessories

MX+OFWY6 Passive Shunt + Auxiliary

MVMN6 Over/Under-Voltage Protection Accessories